Data-Driven Modeling of Hot Workability Integrating Microstructure State and Deformation Conditions
Composite Design and Manufacturing · 2025
DOI: 10.1093/cdm/wqaf017 ↗Kurz gefasst
Fachartikel in der Zeitschrift Composite Design and Manufacturing, 2025. Verfasst von Shuo Guo und 12 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
(1)
Objectives
The hot processing map serves as a fundamental tool for evaluating hot workability and optimizing processing parameters. However, the hot processing map establishes a direct relationship between hot workability and deformation conditions, leaving the mechanisms underlying hot workability evolution unclear and limiting the applicability. This paper aims to develop a method for predicting hot workability that comprehensively accounts for the effects of both deformation conditions and microstructural states. (2)
Methods
Thermal deformation and microstructural characterization are carried out on a low-carbon steel to investigate evolution in hot workability within typical hot working ranges (900-1050 °C, 0.01-10s−1). A neural network model integrated with Shapley additive explanations is then employed to establish the coupling relationships among deformation conditions, microstructural states, and hot workability. (3)
Results
Dislocation density and dynamic recrystallization fraction and deformation conditions exert a coupled effect on hot workability. A prediction framework for hot workability is proposed, integrating microstructure states and deformation conditions, and comprising a coupled internal state variable constitutive model and two neural network models. The complex interactions among deformation conditions, microstructure evolution, and hot workability are thoroughly demonstrated under representative conditions. (4)
Conclusion
DRX softening and sustained work hardening represent two distinct mechanisms for enhancing hot workability at low and high strain rates, respectively. The proposed predictive framework reveals the coupled relationships among deformation conditions, microstructural state, and hot workability.
Zitieren
APA
Guo, S., Liu, C., Barella, S., Liu, Y., Peng, Y., Gruttadauria, A., Belfi, M., Li, D., Chen, Z., Abdelwahed, M., Menezese, J. T. O., Karimi, H. R., & Mapelli, C. (2025). Data-Driven Modeling of Hot Workability Integrating Microstructure State and Deformation Conditions. Composite Design and Manufacturing. https://doi.org/10.1093/cdm/wqaf017
Vancouver
Guo S, Liu C, Barella S, Liu Y, Peng Y, Gruttadauria A, et al. Data-Driven Modeling of Hot Workability Integrating Microstructure State and Deformation Conditions. Composite Design and Manufacturing. 2025. doi:10.1093/cdm/wqaf017
BibTeX
@article{Guo2025,
author = {Guo, Shuo and Liu, Caiyi and Barella, Silvia and Liu, Yang and Peng, Yan and Gruttadauria, Andrea and Belfi, Marco and Li, De and Chen, Zhenyu and Abdelwahed, Marwan and Menezese, Joao T O and Karimi, Hamid Reza and Mapelli, Carlo},
title = {Data-Driven Modeling of Hot Workability Integrating Microstructure State and Deformation Conditions},
journal = {Composite Design and Manufacturing},
year = {2025},
doi = {10.1093/cdm/wqaf017}
}
EUVIMED