High-Temperature Deformation Behavior and Hot Workability of a Ti2AlNb-Based Alloy
Crystals · 16.11.2026 · 16 (11) · 723
DOI: 10.3390/cryst16110723 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 16.11.2026. Verfasst von Jiping Guo und 6 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangxi Provincial Natural Science Foundation, State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology.
Abstract (Originalsprache)
Ti2AlNb-based alloys are promising candidates for aeroengine hot-section components, but their narrow processing windows complicate hot forming. This study investigates the flow behaviors and hot workability of a forged Ti2AlNb-based alloy using isothermal compression tests at deformation temperature of 970–1060 °C and strain rates of 0.01–10 s−1. Four constitutive models are established to describe the flow behaviors, including strain-compensated Arrhenius, multiple linear regression, standard backpropagation (BP), and sparrow-search-optimized BP (SSA-BP) models. The SSA-BP model achieves the highest prediction accuracy, with correlation coefficients of 0.998 and 0.995 for the training and testing sets, respectively. The corresponding mean absolute relative errors are 1.95% and 3.31%, and the root mean square errors are 4.36 and 7.49 MPa. Processing maps constructed based on the Murty instability criterion identify a preferred hot processing window of 1030–1060 °C and 0.01–0.5 s−1 across the evaluated strains. Electron backscatter diffraction reveals a lower α2 phase fraction and a modest increase in the recrystallized grain fraction at higher temperatures. Higher strain rates suppress recrystallization and limit the growth of recrystallized grains. These findings provide alloy-specific guidance for selecting hot processing parameters.
Förderung
- Jiangxi Provincial Natural Science Foundation
- State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology
Zitieren
APA
Guo, J., Tang, M., Jiang, L., Zhang, Y., Chen, W., Shi, W., & Zhao, M. (2026). High-Temperature Deformation Behavior and Hot Workability of a Ti2AlNb-Based Alloy. Crystals, 16(11), 723. https://doi.org/10.3390/cryst16110723
Vancouver
Guo J, Tang M, Jiang L, Zhang Y, Chen W, Shi W, et al. High-Temperature Deformation Behavior and Hot Workability of a Ti2AlNb-Based Alloy. Crystals. 2026;16(11):723. doi:10.3390/cryst16110723
BibTeX
@article{Guo2026,
author = {Guo, Jiping and Tang, Minghao and Jiang, Lihong and Zhang, Yuandong and Chen, Weiping and Shi, Wenpeng and Zhao, Mingjie},
title = {High-Temperature Deformation Behavior and Hot Workability of a Ti2AlNb-Based Alloy},
journal = {Crystals},
year = {2026},
volume = {16},
number = {11},
pages = {723},
doi = {10.3390/cryst16110723}
}
EUVIMED