EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hot Workability and Microstructure Evolution of Homogenized 2050 Al-Cu-Li Alloy during Hot Deformation

Zhiyong Sheng, Yuanchun Huang iD, Yongxing Zhao, Rong Fu, Xucheng Wang, Xi Fan, Fan Wu

Materials · 27.08.2024 · 17 (17) · 4236

DOI: 10.3390/ma17174236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.08.2024. Verfasst von Zhiyong Sheng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Light Alloy Research Institute, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan Province Youth Science Foundation Project, Research Fund of the State Key Laboratory of Precision Manufacturing for Extreme Service Performance.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For this article, hot compression tests were carried out on homogenized 2050 Al-Cu-Li alloys under different deformation temperatures and strain rates, and an Arrhenius-type constitutive model with strain compensation was established to accurately describe the alloy flow behavior. Furthermore, thermal processing maps were created and the deformation mechanisms in different working regions were revealed by microstructural characterization. The results showed that most of the deformed grains orientated toward //CD (CD: compression direction) during the hot compression process, and, together with some dynamic recovery (DRV), dynamic recrystallization (DRX) occurred. The appearance of large-scale DRX grains at low temperatures rather than in high-temperature conditions is related to the particle-stimulated nucleation mechanism, due to the dynamic precipitation that occurs during the deformation process. The hot-working diagrams with a true strain of 0.8 indicated that the high strain-rate regions C (300 °C–400 °C, 0.1–1 s−1) and D (440 °C–500 °C, 0.1–1 s−1) are unfavorable for the processing of 2050 Al-Li alloys, owing to the flow instability caused by local deformation banding, microcracks, and micro-voids. The optimum processing region was considered to be 430 °C–500 °C and 0.1 s−1–0.001 s−1, with a dissipation efficiency of more than 30%, dominated by DRV and DRX; the DRX mechanisms are DDRX and CDRX.

Schlagwörter

Stichwörter der Autor:innen

2050 Al-Cu-Li alloyconstitutive modelingdynamic recrystallizationhot deformation behaviormicrostructureprocessing map

Autor:innen und Institutionen

  • Light Alloy Research Institute, Central South University, Changsha 410083, China.
  • Hunan InnoChina Advanced Materials Co., Ltd., Yueyang 414021, China.
  • College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Changsha 410083, China.
  • School of Metallurgy and Environment, Central South University, Changsha 410083, China.
  • School of Mechanical and Automotive Engineering, Anhui Polytechnic University, Wuhu 241000, China.

ORCID-Profile: Yuanchun Huang

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hunan Province Youth Science Foundation Project
  • Research Fund of the State Key Laboratory of Precision Manufacturing for Extreme Service Performance

Zitieren

APA

Sheng, Z., Huang, Y., Zhao, Y., Fu, R., Wang, X., Fan, X., & Wu, F. (2024). Hot Workability and Microstructure Evolution of Homogenized 2050 Al-Cu-Li Alloy during Hot Deformation. Materials, 17(17), 4236. https://doi.org/10.3390/ma17174236

Vancouver

Sheng Z, Huang Y, Zhao Y, Fu R, Wang X, Fan X, et al. Hot Workability and Microstructure Evolution of Homogenized 2050 Al-Cu-Li Alloy during Hot Deformation. Materials. 2024;17(17):4236. doi:10.3390/ma17174236

BibTeX
@article{Sheng2024,
  author = {Sheng, Zhiyong and Huang, Yuanchun and Zhao, Yongxing and Fu, Rong and Wang, Xucheng and Fan, Xi and Wu, Fan},
  title = {Hot Workability and Microstructure Evolution of Homogenized 2050 Al-Cu-Li Alloy during Hot Deformation},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4236},
  doi = {10.3390/ma17174236}
}
Kostenlos starten →