EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Slag/Steel slag proportioning on performance evolution of quaternary solid-waste-based cementitious binders (Slag–Steel Slag–Fly Ash–FGD Gypsum): mechanical properties, microstructure, and durability

Tongwei An, Zhenwei Jiang, Yujie Zhao, Weisu Weng, Yudong Zhang

Materials Research Express · 26.06.2026 · 13 (12) · 125304

DOI: 10.1088/2053-1591/ae79dd ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Research Express, online erschienen am 18.06.2026. Verfasst von Tongwei An und 4 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central Government-Guided Fund for Local Science and Technology Development — Regional Science and Technology Innovation System Programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates solid-waste cementitious materials prepared primarily from blast furnace slag powder, steel slag powder, fly ash, and flue gas desulfurization gypsum (DG), with a focus on the influence of varying slag-to-steel slag ratios on mechanical properties. The optimal steel slag content range and the corresponding ideal mix proportion were determined. Through microstructural characterization and durability testing, the strength development mechanism was systematically elucidated. The results demonstrate that when the slag-to-steel slag ratio ranges from 2.5:1–4:1 (corresponding to a steel slag content of 15 wt.%–21.43 wt.%), the material exhibits increased strength with good volumetric stability. The interlocking and overlapping network of hydration products—ettringite (AFt) and C-S-H gel—forms a dense microstructure, which effectively refines the pore structure, impedes the ingress of external ions, and ensures favorable durability performance. The optimal mass ratio was determined to be 53.57 wt.% blast furnace slag powder, 21.43 wt.% steel slag powder, 16 wt.% fly ash, and 9 wt.% flue gas DG. The resulting solid-waste binder achieved a 28 d compressive strength of 36.41 MPa, satisfying the requirements for 32.5-grade cement and demonstrating promising potential for engineering applications.

Förderung

  • Central Government-Guided Fund for Local Science and Technology Development — Regional Science and Technology Innovation System Programme

Zitieren

APA

An, T., Jiang, Z., Zhao, Y., Weng, W., & Zhang, Y. (2026). Effect of Slag/Steel slag proportioning on performance evolution of quaternary solid-waste-based cementitious binders (Slag–Steel Slag–Fly Ash–FGD Gypsum): mechanical properties, microstructure, and durability. Materials Research Express, 13(12), 125304. https://doi.org/10.1088/2053-1591/ae79dd

Vancouver

An T, Jiang Z, Zhao Y, Weng W, Zhang Y. Effect of Slag/Steel slag proportioning on performance evolution of quaternary solid-waste-based cementitious binders (Slag–Steel Slag–Fly Ash–FGD Gypsum): mechanical properties, microstructure, and durability. Materials Research Express. 2026;13(12):125304. doi:10.1088/2053-1591/ae79dd

BibTeX
@article{An2026,
  author = {An, Tongwei and Jiang, Zhenwei and Zhao, Yujie and Weng, Weisu and Zhang, Yudong},
  title = {Effect of Slag/Steel slag proportioning on performance evolution of quaternary solid-waste-based cementitious binders (Slag–Steel Slag–Fly Ash–FGD Gypsum): mechanical properties, microstructure, and durability},
  journal = {Materials Research Express},
  year = {2026},
  volume = {13},
  number = {12},
  pages = {125304},
  doi = {10.1088/2053-1591/ae79dd}
}
Kostenlos starten →