The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste
Materials · 24.09.2024 · 17 (19) · 4696
DOI: 10.3390/ma17194696 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.09.2024. Verfasst von Fei Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central Government Guide Local Science and Technology development Fund project.
Abstract (Originalsprache)
This paper presents a novel low-carbon binder formulated from fly ash (FA), ground granulated blast furnace slag, steel slag, and desulfurization gypsum as a quaternary solid waste-based material. It specifically examines the influence of FA content on the mechanical properties and hydration reactions of the quaternary solid waste-based binder. The mortar test results indicate that the optimal FA content is 10%, which yields a 28-day compressive strength 11.28% higher than that of the control group without FA. The spherical particles of fly ash reduce the overall water demand and provide a “lubricating” effect to the paste due to their continuous gradation, improving the fluidity of the slag-steel slag-gypsum cementitious materials. The micro test results indicate that fly ash has minimal effect on the early hydration products and process of the solid waste-based cementitious materials, but after 7 days, it continuously dissolves silicon-oxygen tetrahedrons or aluminum-oxygen tetrahedrons, consuming Ca2+ and OH− in the system. After 28 days, the amount of ettringite and C-(A)-S-H gel generated increases significantly. The pozzolanic activity of fly ash is mainly stimulated by the Ca(OH)2 from steel slag in the later hydration stage. Additionally, spherical fly ash particles can fill the voids in the hardened paste, reducing the formation of cracks and weak zones, and thereby contributing to a denser overall structure of the hydrated binder. The findings of this paper provide data support for the development of low-carbon cement-free binders using fly ash in conjunction with metallurgical slags, thereby contributing to the low-carbon advancement of the construction materials industry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
- Shougang Jingtang Iron&Steel Co., Ltd., Tangshan 063200, China.
- Shougang Group Research Institute of Technology, Beijing 100043, China.
- Nanjing Institute of Environmental Sciences, Ministry of Ecology and Environment, Nanjing 210042, China.
- College of Engineering, University of Miami, Miami, FL 33146, USA.
- School of Civil and Engineering, University of Science and Technology Beijing, Beijing 100083, China.
Förderung
- Central Government Guide Local Science and Technology development Fund project
Zitieren
APA
Wang, F., Du, H., Zheng, Z., Xu, D., Wang, Y., Li, N., Ni, W., & Ren, C. (2024). The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste. Materials, 17(19), 4696. https://doi.org/10.3390/ma17194696
Vancouver
Wang F, Du H, Zheng Z, Xu D, Wang Y, Li N, et al. The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste. Materials. 2024;17(19):4696. doi:10.3390/ma17194696
BibTeX
@article{Wang2024,
author = {Wang, Fei and Du, Huihui and Zheng, Zhong and Xu, Dong and Wang, Ying and Li, Ning and Ni, Wen and Ren, Chao},
title = {The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste},
journal = {Materials},
year = {2024},
volume = {17},
number = {19},
pages = {4696},
doi = {10.3390/ma17194696}
}
EUVIMED