Effect of Steam Curing Regimes on Mechanical Performance, Shrinkage and Microstructure of Fly Ash-Slag-Desulfurization Gypsum Cementitious Materials
Materials · 12.06.2026 · 19 (12) · 2551
DOI: 10.3390/ma19122551 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.06.2026. Verfasst von Xiaoming Wei und 5 weiteren Autor:innen. Beteiligte Einrichtung: Bgrimm Technology Group, Beijing 102628, China. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology of Shandong Province.
Abstract (Originalsprache)
In this study, three types of industrial solid waste—granulated blast furnace slag (GBFS), fly ash, and desulfurization gypsum (DG)—are utilized to collaboratively prepare low-carbon cementitious materials. The effects of steam curing temperature, constant temperature time, and fly ash content on the mechanical properties of multi-source solid waste cementitious materials are systematically investigated, and the optimal mix proportion ratio for low-carbon cementitious materials is determined. The results indicate that as steam curing temperature and constant temperature time increase, the compressive strength of the ternary cementitious material generally shows an upward trend, while the fly ash content exhibits a negative correlation. When the steam curing temperature is 70 °C, the constant temperature time is 10 h, the fly ash content is 20%, and the strength can reach 24 MPa, with both its engineering performance and economic benefits meeting the requirements of practical applications. Meanwhile, the steam curing temperature shows a tendency of first decreasing and then increasing shrinkage rate after 28 d, with the lowest shrinkage rate at 70 °C. Extending the constant temperature time can slightly reduce shrinkage, and the addition of 20–30% fly ash can optimize shrinkage performance. Moreover, the TG/DTG and SEM-EDS microscopic testing demonstrates that the ternary system achieves synergistic activation by accelerated mineral dissolution, ion release and enhanced alkalinity under steam curing, which jointly promotes the formation of AFt and C-A-S-H gel to refine microstructure and improve compactness. This study can not only reduce the consumption of cement, but also facilitate the recycling of industrial waste, providing theoretical support for the application of multi-source solid waste low-carbon materials in practical engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Bgrimm Technology Group, Beijing 102628, China.
- College of Architectural & Engineering, Qingdao Agricultural University, Qingdao 266109, China.
- State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China.
ORCID-Profile: Xiaolong Zhou
Förderung
- Department of Science and Technology of Shandong Province
Zitieren
APA
Wei, X., Wang, L., Yan, J., Zhou, X., Wu, Y., & Wang, M. (2026). Effect of Steam Curing Regimes on Mechanical Performance, Shrinkage and Microstructure of Fly Ash-Slag-Desulfurization Gypsum Cementitious Materials. Materials, 19(12), 2551. https://doi.org/10.3390/ma19122551
Vancouver
Wei X, Wang L, Yan J, Zhou X, Wu Y, Wang M. Effect of Steam Curing Regimes on Mechanical Performance, Shrinkage and Microstructure of Fly Ash-Slag-Desulfurization Gypsum Cementitious Materials. Materials. 2026;19(12):2551. doi:10.3390/ma19122551
BibTeX
@article{Wei2026,
author = {Wei, Xiaoming and Wang, Liang and Yan, Jinghua and Zhou, Xiaolong and Wu, Yaning and Wang, Meinan},
title = {Effect of Steam Curing Regimes on Mechanical Performance, Shrinkage and Microstructure of Fly Ash-Slag-Desulfurization Gypsum Cementitious Materials},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2551},
doi = {10.3390/ma19122551}
}
EUVIMED