EUVIMEDEUVIMED entdecken
Crossref

Investigating the mechanical characteristics, microstructure, biodegradation, and in vitro biocompatibility potential of HAp-assisted, nano-scale TiO 2 @Al 2 O 3 strengthened, Sr-reinforced Mg–Zn composite for internal fracture fixation

Joy Saha, Kaushik Pal iD

Biomedical Materials · 01.06.2026 · 21 (3) · 035013

DOI: 10.1088/1748-605x/ae6aeb ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Materials, online erschienen am 21.05.2026. Verfasst von Joy Saha und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand 247667, India. Hauptthemen laut MEDLINE: Titanium, Durapatite, Magnesium, Aluminum Oxide. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study develops a hybrid-reinforced magnesium (Mg) composite for orthopaedic implants by incorporating bioactive hydroxyapatite (HAp) and inert TiO 2 @Al 2 O 3 nanoparticles. HAp is synthesized via controlled precipitation, while TiO 2 -coated Al 2 O 3 is produced using a sol–gel method. A multi-phase Mg–Zn–HAp–TiO 2 @Al 2 O 3 –Sr composite (PMS) is compared with pure Mg (PM). The PMS composite exhibited uniform reinforcement distribution, significantly enhanced mechanical properties (161.29% increase in tensile yield strength and 116.66% increase in UTS compared to PM), and a reduced corrosion rate of 0.661 mm yr −1 . Cytocompatibility results showed over 80% cell viability at 25% and 50% extract concentrations on day 1, 3 and 5. These findings demonstrate that synergistic reinforcement with Zn, HAp, TiO 2 @Al 2 O 3 , and Sr effectively improves the mechanical performance, corrosion resistance, and biocompatibility of Mg for orthopaedic implant applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumDurapatiteMagnesiumAluminum OxideBiocompatible MaterialsFracture Fixation, InternalMaterials TestingZincTensile StrengthStrontiumCell SurvivalAnimalsCorrosionHumansMice

Stichwörter der Autor:innen

alumina-titanatecell viabilitycompositecore-shellhydroxyapatitenano-powderstir-casting

Substanzen

Titaniumtitanium dioxideDurapatiteMagnesiumZincAluminum OxideBiocompatible MaterialsStrontium

Autor:innen und Institutionen

  • Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand 247667, India.
  • Centre for Nanotechnology, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand 247667, India.

ORCID-Profile: Kaushik Pal

Zitieren

APA

Saha, J., & Pal, K. (2026). Investigating the mechanical characteristics, microstructure, biodegradation, and in vitro biocompatibility potential of HAp-assisted, nano-scale TiO 2 @Al 2 O 3 strengthened, Sr-reinforced Mg–Zn composite for internal fracture fixation. Biomedical Materials, 21(3), 035013. https://doi.org/10.1088/1748-605x/ae6aeb

Vancouver

Saha J, Pal K. Investigating the mechanical characteristics, microstructure, biodegradation, and in vitro biocompatibility potential of HAp-assisted, nano-scale TiO 2 @Al 2 O 3 strengthened, Sr-reinforced Mg–Zn composite for internal fracture fixation. Biomedical Materials. 2026;21(3):035013. doi:10.1088/1748-605x/ae6aeb

BibTeX
@article{Saha2026,
  author = {Saha, Joy and Pal, Kaushik},
  title = {Investigating the mechanical characteristics, microstructure, biodegradation, and in vitro biocompatibility potential of HAp-assisted, nano-scale TiO 2 @Al 2 O 3 strengthened, Sr-reinforced Mg–Zn composite for internal fracture fixation},
  journal = {Biomedical Materials},
  year = {2026},
  volume = {21},
  number = {3},
  pages = {035013},
  doi = {10.1088/1748-605x/ae6aeb}
}
Kostenlos starten →