EUVIMEDEUVIMED entdecken
Crossref

Optimizing controlled degradation, bioactivity, and mechanical behavior in sol–gel synthesized aluminum titanate biomaterials

Shanmugapriya B iD, Shailajha S iD, Sakthi Muthulakshmi S

Biomedical Materials · 2025

DOI: 10.1088/1748-605x/adbb46 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Materials, 2025. Verfasst von Shanmugapriya B und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Manonmaniam Sundaranar University, Tirunelveli 627012, Tamil Nadu, India. Hauptthemen laut MEDLINE: Titanium, Biocompatible Materials, Aluminum. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 98 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Orthopaedic applications require materials that balance mechanical strength, biocompatibility, and controlled degradation, particularly for bone regeneration and load-bearing purposes. This study investigates the effects of varying weight percentages of Al 2 O 3 and TiO 2 (25:75, 50:50, and 75:25) on the characteristics of Al 2 TiO 5 biomaterials synthesized via the sol–gel method. Structural and chemical characterizations, including XRD and FTIR, confirmed the successful synthesis of phase-pure Al 2 TiO 5 , highlighting functional groups such as Al–O and Ti–O. Among the tested compositions, the 50:50 ratio exhibited the strongest antibacterial efficacy against S. aureus and E. coli , comparable to a commercial antibiotic, while also promoting hydroxyapatite (HAp) deposition in simulated body fluid (SBF). Additionally, cytotoxicity assessments using the L929 murine fibroblast cell line revealed that the 50:50 composition had the lowest toxicity. All formulations demonstrated controlled degradation, minimizing pH fluctuations and enhancing bioactivation and biocompatibility. Zeta potential analysis indicated that the 50:50 composition exhibited the most negative values over time, suggesting strong surface interactions with SBF and a favorable environment for HAp nucleation. Furthermore, the compressive strength of all formulations (71–74 MPa) was sufficient for load-bearing applications. These findings suggest that optimizing the 50:50 weight ratio enhances bioactivity, mechanical stability, and biocompatibility, making it a promising candidate for orthopedic and bone tissue engineering applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumBiocompatible MaterialsAluminumAnimalsMiceMaterials TestingDurapatiteCompressive StrengthCell LineAnti-Bacterial AgentsEscherichia coliStaphylococcus aureusFibroblastsSpectroscopy, Fourier Transform InfraredX-Ray DiffractionAluminum OxideGelsCell Survival

Stichwörter der Autor:innen

antibacterial behaviorbiodegradationcell viabilityin-vitro bioactivitymechanical strength

Substanzen

TitaniumBiocompatible MaterialsDurapatiteAnti-Bacterial Agentstitanium dioxideAluminum OxideAluminumGels

Autor:innen und Institutionen

  • Department of Physics, Manonmaniam Sundaranar University, Tirunelveli 627012, Tamil Nadu, India.

ORCID-Profile: Shanmugapriya B, Shailajha S

Zitieren

APA

B, S., S, S., & S, S. M. (2025). Optimizing controlled degradation, bioactivity, and mechanical behavior in sol–gel synthesized aluminum titanate biomaterials. Biomedical Materials. https://doi.org/10.1088/1748-605x/adbb46

Vancouver

B S, S S, S SM. Optimizing controlled degradation, bioactivity, and mechanical behavior in sol–gel synthesized aluminum titanate biomaterials. Biomedical Materials. 2025. doi:10.1088/1748-605x/adbb46

BibTeX
@article{B2025,
  author = {B, Shanmugapriya and S, Shailajha and S, Sakthi Muthulakshmi},
  title = {Optimizing controlled degradation, bioactivity, and mechanical behavior in sol–gel synthesized aluminum titanate biomaterials},
  journal = {Biomedical Materials},
  year = {2025},
  doi = {10.1088/1748-605x/adbb46}
}
Kostenlos starten →