EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Model-based design and placement analysis for epidural cortical stimulation

Sudiksha Sridhar iD, Yiru Li iD, Brandon J Thio iD, Steven M Goetz, Angel V Peterchev iD, Warren M Grill iD

Journal of Neural Engineering · 01.08.2026 · 23 (4) · 046034

DOI: 10.1088/1741-2552/ae8720 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Neural Engineering, online erschienen am 27.07.2026. Verfasst von Sudiksha Sridhar und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Duke University, Durham 27708, NC, United States of America. Hauptthemen laut MEDLINE: Electrodes, Implanted, Cerebral Cortex, Models, Neurological, Epidural Space. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Motif Neurotech.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Epidural cortical stimulation (ECS) offers a promising approach for chronic neuromodulation to treat depression. Effective stimulation requires the generation of focal electric fields within targeted cortical regions while minimizing current spread to the scalp, but the influence of device design and implantation strategies remain unclear.

Methods

We used computational modeling to evaluate feasibility of ECS in generating fields sufficient for neural activation. We systematically examined how variations in electrode position and orientation, device design, anatomical, and implantation parameters influence E-field distributions in the cortex and scalp.

Results

ECS generated E-fields sufficient for neural activation (⩾75 V m −1 ) and electrodes over the gyral crown oriented perpendicular to the gyrus maximized the volume of E-fields ⩾75 V m −1 in the left dlPFC. Increasing electrode surface area broadened field spread but reduced penetration depth and required higher current and energy to achieve equivalent E-fields. Incorporating an insulating burr hole cap or insulating sheet substantially reduced scalp currents with modest increases in energy. Cortical E-fields remained consistent across anatomical and implantation variations, supporting robustness. However, these variations required different current amplitudes, energy demands, and scalp currents, highlighting the need for patient-specific programming. Chronic implantation factors, such as tissue encapsulation increased the power required to maintain equivalent stimulation by up to fourfold.

Conclusions

Trade-offs between cortical electric field, scalp currents, and energy efficiency highlight the need for informed design, intentional placement, and patient-specific programming for effective ECS. These findings provide a principled framework for ECS optimization and clinical standardization, enabling more consistent and effective therapeutic targeting.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Electrodes, ImplantedCerebral CortexModels, NeurologicalEpidural SpaceDeep Brain StimulationComputer SimulationHumansEquipment DesignAnimals

Stichwörter der Autor:innen

brain stimulationcomputational modelingcortical stimulationelectrodeneuromodulation

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Duke University, Durham 27708, NC, United States of America.
  • Department of Psychiatry and Behavioral Sciences, Duke University, Durham 27710, NC, United States of America.
  • Motif Neurotech, 2450 Holcombe Blvd, Houston, TX, United States of America.
  • Department of Electrical and Computer Engineering, Duke University, Durham 27708, NC, United States of America.
  • Department of Neurosurgery, Duke University, Durham 27710, NC, United States of America.
  • Department of Neurobiology, Duke University Medical Center, Durham 27710, NC, United States of America.

ORCID-Profile: Sudiksha Sridhar, Yiru Li, Brandon J Thio, Angel V Peterchev, Warren M Grill

Förderung

  • Motif Neurotech

Zitieren

APA

Sridhar, S., Li, Y., Thio, B. J., Goetz, S. M., Peterchev, A. V., & Grill, W. M. (2026). Model-based design and placement analysis for epidural cortical stimulation. Journal of Neural Engineering, 23(4), 046034. https://doi.org/10.1088/1741-2552/ae8720

Vancouver

Sridhar S, Li Y, Thio BJ, Goetz SM, Peterchev AV, Grill WM. Model-based design and placement analysis for epidural cortical stimulation. Journal of Neural Engineering. 2026;23(4):046034. doi:10.1088/1741-2552/ae8720

BibTeX
@article{Sridhar2026,
  author = {Sridhar, Sudiksha and Li, Yiru and Thio, Brandon J and Goetz, Steven M and Peterchev, Angel V and Grill, Warren M},
  title = {Model-based design and placement analysis for epidural cortical stimulation},
  journal = {Journal of Neural Engineering},
  year = {2026},
  volume = {23},
  number = {4},
  pages = {046034},
  doi = {10.1088/1741-2552/ae8720}
}
Kostenlos starten →