Influences of design aspects on recording functionality of cuff-type peripheral nerve interfaces
Journal of Neural Engineering · 2026
DOI: 10.1088/1741-2552/aea36d ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Neural Engineering, 2026. Verfasst von Vera A Oppelt und 6 weiteren Autor:innen. Beteiligte Einrichtung: CorTec GmbH, Neuer Messplatz 3, 79108 Freiburg, Germany. Hauptthemen laut MEDLINE: Peripheral Nerves, Action Potentials, Electrodes, Implanted, Models, Neurological. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Objective. High-quality recording of peripheral nerve signals is a critical requirement for implantable neural interfaces, yet the influence of contact configuration and electrical insulation on cuff electrode recording quality remains poorly understood. Approach. Using a physical nerve model in vitro , the transfer function (TF) of commercially available split-cylinder and spiral cuff electrodes was measured for systematically varied contact configurations, including contact size, spacing, and size ratio of cathode to anode, as well as degree of electrical insulation. To derive single-fiber and compound action potentials, the TF was convolved with modeled action currents, enabling direct comparison of recording quality across designs. Main results. Contact edge spacing was found to be more decisive than contact surface area for recording amplitude, regardless of contact segmentation. In quasi-tripolar configurations, common mode suppression additionally reduced sensitivity to geometric variations. Both the length of the longitudinal insulation and the integrity of the electrode seal were found to strongly influence recording amplitude, with complete removal of the seal reducing amplitude by approximately 50%, outweighing all geometric design parameters combined. Significance. These findings establish electrical insulation integrity as the primary design criterion for cuff electrode recording performance, shifting focus away from contact geometry alone, and provide a practical framework for the development of next-generation peripheral nerve interfaces.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CorTec GmbH, Neuer Messplatz 3, 79108 Freiburg, Germany.
- Department of Microsystems Engineering (IMTEK)-University of Freiburg, Laboratory for Biomedical Microtechnology, Georges-Kohler Allee 201, 79110 Freiburg, Germany.
- Hochschule Offenburg, Badstrasse 24, 77652 Offenburg, Germany.
- Faculty IV Electrical Engineering and Computer Science, Technical University Berlin, Marchstrasse 23, 10587 Berlin, Germany.
- BrainLinks-BrainTools Center-IMBIT//Neuroprobes, University of Freiburg, Georges-Köhler-Allee 201, 79110 Freiburg, Germany.
- Bernstein Center Freiburg-University of Freiburg, Hansastraße 9a, 79104 Freiburg, Germany.
ORCID-Profile: Vera A Oppelt, Emma Mueller, Seline Mahler, Thomas Stieglitz
Zitieren
APA
Oppelt, V. A., Mueller, E., Pfeiffer, F., Mahler, S., Pfeifer, R., Schuettler, M., & Stieglitz, T. (2026). Influences of design aspects on recording functionality of cuff-type peripheral nerve interfaces. Journal of Neural Engineering. https://doi.org/10.1088/1741-2552/aea36d
Vancouver
Oppelt VA, Mueller E, Pfeiffer F, Mahler S, Pfeifer R, Schuettler M, et al. Influences of design aspects on recording functionality of cuff-type peripheral nerve interfaces. Journal of Neural Engineering. 2026. doi:10.1088/1741-2552/aea36d
BibTeX
@article{Oppelt2026,
author = {Oppelt, Vera A and Mueller, Emma and Pfeiffer, Fabian and Mahler, Seline and Pfeifer, Ronny and Schuettler, Martin and Stieglitz, Thomas},
title = {Influences of design aspects on recording functionality of cuff-type peripheral nerve interfaces},
journal = {Journal of Neural Engineering},
year = {2026},
doi = {10.1088/1741-2552/aea36d}
}
EUVIMED