EUVIMEDEUVIMED entdecken
Crossref

Flash x-ray radiography analysis of detonation wave propagation in additive-manufactured high explosives

Cameron B. Brown, Laura B. Smilowitz, Dennis K. Remelius, Andrew M. Schmalzer, Bryce C. Tappan, Tariq D. Aslam, Seetharaman Sridhar, Alexander H. Mueller

Journal of Applied Physics · 28.05.2023 · 133 (20)

DOI: 10.1063/5.0146540 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 24.05.2023. Verfasst von Cameron B. Brown und 7 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: Laboratory Directed Research and Development, LANL Office of Experimental Science Dynamic Material Properties Campaign.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent research has demonstrated that additive manufacturing (AM) can be used to produce directionally sensitive high explosives (HEs), but detonation wave propagation in AM HEs with variable internal structure has not been studied. In this work, samples were printed using a 73 wt. % octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine-based HE ink. Flash x-ray radiography imaging was used to observe density changes in two imaging planes of each sample during detonation, and high-speed imaging was used to calculate the detonation velocity at the HE surface. The detonation front initially appears to fail in internal channel regions of the HE, but late reactions occurred in two samples, which increased the material bulk density by 2.8%, possibly due to shock convergence phenomena. The calculated detonation wave pressure similarly increased, but the accuracy of the results is uncertain because of the deviation of the low bulk density printed samples from the cast charge principal isentrope. This work demonstrates that structure can be effectively utilized to guide detonation wave propagation through HE charges.

Förderung

  • Laboratory Directed Research and Development
  • LANL Office of Experimental Science Dynamic Material Properties Campaign

Zitieren

APA

Brown, C. B., Smilowitz, L. B., Remelius, D. K., Schmalzer, A. M., Tappan, B. C., Aslam, T. D., Sridhar, S., & Mueller, A. H. (2023). Flash x-ray radiography analysis of detonation wave propagation in additive-manufactured high explosives. Journal of Applied Physics, 133(20). https://doi.org/10.1063/5.0146540

Vancouver

Brown CB, Smilowitz LB, Remelius DK, Schmalzer AM, Tappan BC, Aslam TD, et al. Flash x-ray radiography analysis of detonation wave propagation in additive-manufactured high explosives. Journal of Applied Physics. 2023;133(20). doi:10.1063/5.0146540

BibTeX
@article{Brown2023,
  author = {Brown, Cameron B. and Smilowitz, Laura B. and Remelius, Dennis K. and Schmalzer, Andrew M. and Tappan, Bryce C. and Aslam, Tariq D. and Sridhar, Seetharaman and Mueller, Alexander H.},
  title = {Flash x-ray radiography analysis of detonation wave propagation in additive-manufactured high explosives},
  journal = {Journal of Applied Physics},
  year = {2023},
  volume = {133},
  number = {20},
  doi = {10.1063/5.0146540}
}
Kostenlos starten →