Crystallization of Slag Films of CaO-Al2O3-BaO-CaF2-Li2O-Based Mold Fluxes for High-Aluminum Steels’ Continuous Casting
Materials · 25.02.2023 · 16 (5) · 1903
DOI: 10.3390/ma16051903 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.02.2023. Verfasst von Xiao Long und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Energy Engineering, Guizhou Institute of Technology, Guiyang 550003, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Guizhou Province, Growth Project of Young Scientific and Technological Talents in Universities of Guizhou Province.
Abstract (Originalsprache)
In this study, solidified films of CaO-Al2O3-BaO-CaF2-Li2O-based mold fluxes with different contents of Al2O3 addition were acquired by immersing an improved water-cooled copper probe in bulk molten slags. This probe can obtain films with representative structures. Different slag temperatures and probe immersion times were employed to investigate the crystallization process. The crystals in the solidified films were identified using X-ray diffraction, the morphologies of the crystals were observed using optical microscopy and scanning electron microscopy, and the kinetic conditions, especially the activation energy of devitrified crystallization in glassy slags, were calculated and discussed based on the differential scanning calorimetry. The results indicated that after adding extra Al2O3, the growing speed and thickness of the solidified films increased, and more time was required for the film thickness to reach a steady state. In addition, fine spinel (MgAl2O4) precipitated in the films at the early stage of solidification after adding 10 wt% of extra Al2O3. Together with LiAlO2, spinel (MgAl2O4) acted as nuclei for the precipitation of BaAl2O4. The apparent activation energy of initial devitrified crystallization decreased from 314.16 KJ/mol (original slag) to 297.32 KJ/mol (5 wt% Al2O3 added) and 269.46 KJ/mol (10 wt% Al2O3 added). The crystallization ratio of the films also increased after adding extra Al2O3.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials and Energy Engineering, Guizhou Institute of Technology, Guiyang 550003, China.
ORCID-Profile: Xiao Long
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Guizhou Province
- Growth Project of Young Scientific and Technological Talents in Universities of Guizhou Province
- Guizhou Institute of Technology high-level talent research launch project
Zitieren
APA
Long, X., Long, S., Luo, W., Li, X., Tu, C., Na, Y., & Xu, J. (2023). Crystallization of Slag Films of CaO-Al2O3-BaO-CaF2-Li2O-Based Mold Fluxes for High-Aluminum Steels’ Continuous Casting. Materials, 16(5), 1903. https://doi.org/10.3390/ma16051903
Vancouver
Long X, Long S, Luo W, Li X, Tu C, Na Y, et al. Crystallization of Slag Films of CaO-Al2O3-BaO-CaF2-Li2O-Based Mold Fluxes for High-Aluminum Steels’ Continuous Casting. Materials. 2023;16(5):1903. doi:10.3390/ma16051903
BibTeX
@article{Long2023,
author = {Long, Xiao and Long, Shaolei and Luo, Wenbo and Li, Xiang and Tu, Changping and Na, Yunhao and Xu, Jinxin},
title = {Crystallization of Slag Films of CaO-Al2O3-BaO-CaF2-Li2O-Based Mold Fluxes for High-Aluminum Steels’ Continuous Casting},
journal = {Materials},
year = {2023},
volume = {16},
number = {5},
pages = {1903},
doi = {10.3390/ma16051903}
}
EUVIMED