EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Brittle-ductile synergistic compressive behavior of the material-extruded hybrid structure with an embedded rhombicuboctahedron core in additive manufacturing: a preliminary study

Donghyeon Kim, Bogyeom Choi, Jaerin Kim, Jeongin Lee, Seong Je Park

Mechanics & Industry · 2026 · 27 · 34

DOI: 10.1051/meca/2026032 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mechanics & Industry, online erschienen am 20.07.2026. Verfasst von Donghyeon Kim und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a hybrid structure with an embedded rhombicuboctahedral core was fabricated using a material extrusion process, and its compressive behavior was investigated. Polylactic acid (PLA) was used as a stiff internal core, while thermoplastic copolyester (TPC) served as a compliant matrix. The hybrid structure exhibited a specific compressive strength and mass-normalized energy absorption approximately 1.46 times and 1.74–1.86 times higher than that of the TPC-based cubic structure. While the TPC structure showed a typical plateau behavior associated with progressive collapse, the hybrid structure demonstrated a higher initial stiffness and a continuously increasing stress response with noticeable stress fluctuations due to the sequential yielding of the PLA core. This behavior reflects a brittle–ductile synergistic effect, where the TPC matrix enables energy absorption and the PLA core enhances load-bearing capacity. These findings highlight the potential of multi-material additive manufacturing for designing mechanically efficient hybrid structures.

Zitieren

APA

Kim, D., Choi, B., Kim, J., Lee, J., & Park, S. J. (2026). Brittle-ductile synergistic compressive behavior of the material-extruded hybrid structure with an embedded rhombicuboctahedron core in additive manufacturing: a preliminary study. Mechanics & Industry, 27, 34. https://doi.org/10.1051/meca/2026032

Vancouver

Kim D, Choi B, Kim J, Lee J, Park SJ. Brittle-ductile synergistic compressive behavior of the material-extruded hybrid structure with an embedded rhombicuboctahedron core in additive manufacturing: a preliminary study. Mechanics & Industry. 2026;27:34. doi:10.1051/meca/2026032

BibTeX
@article{Kim2026,
  author = {Kim, Donghyeon and Choi, Bogyeom and Kim, Jaerin and Lee, Jeongin and Park, Seong Je},
  title = {Brittle-ductile synergistic compressive behavior of the material-extruded hybrid structure with an embedded rhombicuboctahedron core in additive manufacturing: a preliminary study},
  journal = {Mechanics & Industry},
  year = {2026},
  volume = {27},
  pages = {34},
  doi = {10.1051/meca/2026032}
}
Kostenlos starten →