EUVIMEDEUVIMED entdecken
Crossref

Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment

Ezzeddine Ftoutou, Mihed Ben Said, Imed Hajjaji, Sirine Stambouli, Moez Trigui, Ated Ben Khalifa

Matériaux & Techniques · 2026 · 114 (3) · 305

DOI: 10.1051/mattech/2026008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Matériaux & Techniques, online erschienen am 24.03.2026. Verfasst von Ezzeddine Ftoutou und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study assesses the mechanical properties of four composite materials, including two hybrid composites, produced using the autoclave molding method. Modal analysis shows that carbon fiber reinforced polymer exhibits the highest Young's modulus (91 GPa), while the hybrid carbon/glass and glass/carbon fiber reinforced polymers demonstrate intermediate stiffness, with moduli of 87 GPa and 57.5 GPa, respectively. Glass fiber reinforced polymer presents the lowest Young's modulus, at 28 GPa. The study also examines how cutting parameters—specifically cutting speed, feed per tooth, and width of cut—affect vibration levels during trimming. The results indicate that increasing cutting speed and feed rate leads to higher vibration amplitudes. These parameters also influence surface quality, with measured surface roughness values ranging from 0.45 µm to 0.9 µm. In terms of material comparison, the hybrid composites exhibit vibration behavior and surface finish intermediate between those of carbon-fiber- and glass-fiber-reinforced polymers. The main takeaway is that selecting appropriate cutting parameters is essential to balance surface quality and machining efficiency, particularly for hybrid composite materials.

Zitieren

APA

Ftoutou, E., Said, M. B., Hajjaji, I., Stambouli, S., Trigui, M., & Khalifa, A. B. (2026). Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment. Matériaux & Techniques, 114(3), 305. https://doi.org/10.1051/mattech/2026008

Vancouver

Ftoutou E, Said MB, Hajjaji I, Stambouli S, Trigui M, Khalifa AB. Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment. Matériaux & Techniques. 2026;114(3):305. doi:10.1051/mattech/2026008

BibTeX
@article{Ftoutou2026,
  author = {Ftoutou, Ezzeddine and Said, Mihed Ben and Hajjaji, Imed and Stambouli, Sirine and Trigui, Moez and Khalifa, Ated Ben},
  title = {Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment},
  journal = {Matériaux & Techniques},
  year = {2026},
  volume = {114},
  number = {3},
  pages = {305},
  doi = {10.1051/mattech/2026008}
}
Kostenlos starten →