EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography

Zijie Zhao, Minglong Li, Ya Liu, Anhua Wang, Biaojun Zhou iD, Junfeng Hu iD

Nanomaterials · 09.09.2024 · 14 (17) · 1462

DOI: 10.3390/nano14171462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 09.09.2024. Verfasst von Zijie Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Transient Physics, Nanjing University of Science and Technology, Nanjing 210094, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Structural health monitoring (SHM) of composite materials is of great significance in various practical applications. However, it is a challenge to accurately monitor the damage of composites without affecting their mechanical properties. In this paper, an embedded sensing layer based on carbon nanotube-coated glass fiber is designed, combined with electrical resistance tomography (ERT) for in situ damage monitoring. Multi-wall carbon nanotube-coated glass fiber (MWCNT-GF) is prepared and embedded into laminates as an in situ sensing layer. Low-velocity impact experiments demonstrate that the embedded sensing layer has high compatibility with the composite laminates and has no adverse effect on its impact response; although, the energy absorption behavior of glass fiber-reinforced polymer (GFRP) laminates containing MWCNT-GF occurs about 10% earlier than that of GFRP laminates overall. ERT technology is used to analyze the laminates after a low-velocity impact test. The results show that the in situ monitoring method with the embedded MWCNT-GF sensing layer can achieve high precision in imaging localization of impact damage, and the error of the detected damage area is only 4.5%.

Schlagwörter

Stichwörter der Autor:innen

ERT imagingcarbon nanotubesdamage monitoringlow-velocity impactsensing fibers

Autor:innen und Institutionen

  • National Key Laboratory of Transient Physics, Nanjing University of Science and Technology, Nanjing 210094, China.
  • School of Mechanical and Power Engineering, Nanjing Tech University, Nanjing 211800, China.
  • Jiangsu Olymspan Thermal Energy Equipment Co., Ltd., Changzhou 213101, China.
  • Suzhou Yihe Yongli New Energy Co., Ltd., Suzhou 215400, China.

ORCID-Profile: Biaojun Zhou, Junfeng Hu

Förderung

  • China Postdoctoral Science Foundation

Zitieren

APA

Zhao, Z., Li, M., Liu, Y., Wang, A., Zhou, B., & Hu, J. (2024). Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography. Nanomaterials, 14(17), 1462. https://doi.org/10.3390/nano14171462

Vancouver

Zhao Z, Li M, Liu Y, Wang A, Zhou B, Hu J. Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography. Nanomaterials. 2024;14(17):1462. doi:10.3390/nano14171462

BibTeX
@article{Zhao2024,
  author = {Zhao, Zijie and Li, Minglong and Liu, Ya and Wang, Anhua and Zhou, Biaojun and Hu, Junfeng},
  title = {Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {17},
  pages = {1462},
  doi = {10.3390/nano14171462}
}
Kostenlos starten →