EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Micro-Computed Tomography Non-Destructive Testing and Defect Quantitative Analysis of Carbon Fiber-Reinforced Polymer, Glass Fiber-Reinforced Polymer and Carbon/Glass Hybrid Laminates Using Deep Learning Recognition

Mingmeng Wang, Bo Zhang, Shiyu Zhan, Long Yang, Lanxin Jiang, Yujia Wang

Applied Sciences · 17.11.2025 · 15 (22) · 12192

DOI: 10.3390/app152212192 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.11.2025. Verfasst von Mingmeng Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, Open Subject of State Key Laboratory of Rail Transit Vehicle System, Natural Science Foundation of Sichuan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

X-ray micro-computed tomography (Micro-CT) is an advanced technique capable of non-destructive detection of internal defects in materials. Fiber-reinforced polymer (FRP) laminates are prone to forming defects such as pores during the manufacturing process, which significantly affect their mechanical properties. In this study, Micro-CT technology was employed to conduct non-destructive testing on carbon fiber (CFRP), glass fiber (GFRP) and carbon/glass hybrid (C/G) laminates. Combined with the U-Net++ deep learning model, precise segmentation and three-dimensional reconstruction of pores were achieved. A systematic quantitative analysis was carried out on the distribution, size, volume and porosity of pores in six specimens with two layup angles (0/90 and ±45). The research results show that the pores in CFRP are mainly dispersed micro-pores and are relatively evenly distributed; the porosity of GFRP is the highest, and large interlaminar pores are prone to forming. The porosity fluctuates sharply in the thickness direction, revealing that the interlaminar interface is a defect-sensitive area. This provides a reliable quantitative basis and theoretical support for optimization and defect assessment.

Förderung

  • the National Natural Science Foundation of China
  • Open Subject of State Key Laboratory of Rail Transit Vehicle System
  • Natural Science Foundation of Sichuan Province
  • Science Foundation of Zigong Government and Sichuan University
  • Open Subject of State Key Laboratory for Strength and Vibration of Mechanical Structures

Zitieren

APA

Wang, M., Zhang, B., Zhan, S., Yang, L., Jiang, L., & Wang, Y. (2025). Micro-Computed Tomography Non-Destructive Testing and Defect Quantitative Analysis of Carbon Fiber-Reinforced Polymer, Glass Fiber-Reinforced Polymer and Carbon/Glass Hybrid Laminates Using Deep Learning Recognition. Applied Sciences, 15(22), 12192. https://doi.org/10.3390/app152212192

Vancouver

Wang M, Zhang B, Zhan S, Yang L, Jiang L, Wang Y. Micro-Computed Tomography Non-Destructive Testing and Defect Quantitative Analysis of Carbon Fiber-Reinforced Polymer, Glass Fiber-Reinforced Polymer and Carbon/Glass Hybrid Laminates Using Deep Learning Recognition. Applied Sciences. 2025;15(22):12192. doi:10.3390/app152212192

BibTeX
@article{Wang2025,
  author = {Wang, Mingmeng and Zhang, Bo and Zhan, Shiyu and Yang, Long and Jiang, Lanxin and Wang, Yujia},
  title = {Micro-Computed Tomography Non-Destructive Testing and Defect Quantitative Analysis of Carbon Fiber-Reinforced Polymer, Glass Fiber-Reinforced Polymer and Carbon/Glass Hybrid Laminates Using Deep Learning Recognition},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {22},
  pages = {12192},
  doi = {10.3390/app152212192}
}
Kostenlos starten →