EUVIMEDOpdag EUVIMED
ÜbersichtsarbeitOpen access · CC BY 4.0

Recyclable Photopolymers for Sustainable 3D Printing

Qirui Wu, Youyi Sun iD, Si Wu iD

Polymer Science & Technology · 2026-06-23 · 2 (6) · 365-381

DOI: 10.1021/polymscitech.5c00144 ↗

At a glance

Übersichtsarbeit in Polymer Science & Technology, published online on 2026-03-03. Written by Qirui Wu and 2 co-authors. Institution: Hefei National Research Center for Physical Sciences at the Microscale, Anhui Key Laboratory of Optoelectronic Science and Technology, Department of …. Cited 5 times so far (Crossref); 121 references. The full text is freely available (open access, CC BY 4.0). Funded by: University of Science and Technology of China Center for Micro- and Nanoscale Research and Fabrication, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The use of photopolymers for 3D printing facilitates high-precision fabrication of geometrically complex structures, offering exceptional dimensional accuracy and rapid curing capabilities that position it as a cornerstone of modern additive manufacturing. However, conventional photopolymers form permanently crosslinked networks, which are resistant to recycling. This inherent limitation generates persistent waste streams that are fundamentally incompatible with circular economy principles. Consequently, the development of recyclable photopolymers that maintain printability while enabling closed-loop material recovery represents a critical Frontier for sustainable manufacturing. Advancing these materials will remain essential for reconciling technological progress with environmental stewardship in the foreseeable future. This review examines recent breakthroughs in recyclable photopolymer systems for 3D printing. First, mainstream photopolymerization techniques compatible with recyclable materials are outlined, followed by an elucidation of core design strategies incorporating chemical depolymerization, thermo-mechanical reprocessing, and noncovalent interactions. Fundamental recycling mechanisms are detailed alongside performance modulation methodologies. Furthermore, emerging applications in soft robotics, wearable devices, and bioelectronic devices where recyclable photopolymers enable multifunctional devices are highlighted. Finally, persistent challenges regarding network durability and recycling efficiency are addressed, and future research directions toward truly sustainable 3D printing are proposed.

Subjects

Author keywords

3D printingdepolymerizationnoncovalent bondrecyclabilityreprocessing

Authors and institutions

  • Hefei National Research Center for Physical Sciences at the Microscale, Anhui Key Laboratory of Optoelectronic Science and Technology, Department of Polymer Science and Engineering, University of Science and Technology…
  • School of Materials Science and Engineering, North University of China, Taiyuan 030051, China.

ORCID profiles: Youyi Sun, Si Wu

Funding

  • University of Science and Technology of China Center for Micro- and Nanoscale Research and Fabrication
  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China
  • Natural Science Foundation of Anhui Province
  • Hefei Municipal Natural Science Foundation

Cite

APA

Wu, Q., Sun, Y., & Wu, S. (2026). Recyclable Photopolymers for Sustainable 3D Printing. Polymer Science & Technology, 2(6), 365-381. https://doi.org/10.1021/polymscitech.5c00144

Vancouver

Wu Q, Sun Y, Wu S. Recyclable Photopolymers for Sustainable 3D Printing. Polymer Science & Technology. 2026;2(6):365-381. doi:10.1021/polymscitech.5c00144

BibTeX
@article{Wu2026,
  author = {Wu, Qirui and Sun, Youyi and Wu, Si},
  title = {Recyclable Photopolymers for Sustainable 3D Printing},
  journal = {Polymer Science & Technology},
  year = {2026},
  volume = {2},
  number = {6},
  pages = {365--381},
  doi = {10.1021/polymscitech.5c00144}
}
Start for free →