3D Printing as a New Solution for Paper-Based Device Manufacturing: On-Demand Wax 3D Printing for Integrated Microfluidic Reagent Delivery, Sample Treatment, and Biosensing
ACS Sensors · 11.11.2026
DOI: 10.1021/acssensors.6c03814 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, online erschienen am 11.11.2026. Verfasst von Panagiota M Kalligosfyri und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Pharmacy, University of Naples Federico II, Via D. Montesano 49, Naples80131, Italy. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Society of Chemistry, King Saud University, Associazione Italiana per la Ricerca sul Cancro.
Abstract (Originalsprache)
Since George Whitesides introduced the first paper-based device in the early 2000s, many scientists have faced challenges because wax printers are no longer produced. Although diverse strategies have been developed, there is still a need for cheap, scalable, and easy-to-use alternatives. Here, we introduce 3D printing of wax-based filaments as a direct, programmable strategy for fabricating microfluidic paper-based architectures and devices. Commercial wax filaments originally developed for investment casting and jewelry manufacturing were exploited owing to their low melting temperature, ultralow melt viscosity, and intrinsic hydrophobicity. Similarly to wax printing, here the wax filament is 3D-printed into the cellulose network, producing continuous through-thickness hydrophobic barriers and reliable fluid confinement. Using a low-cost commercial 3D printer, we established a library of customizable two- and three-dimensional architectures, including single-channel devices, multichannel configurations for fluid splitting and mixing, reaction networks, and miniaturized enzyme-linked immunosorbent assay (ELISA)-like well arrays. The structures were evaluated for dimensional fidelity, barrier integrity, fluid transport, flow time, reproducibility, batch consistency, dimensional retention, scalability, and nozzle-dependent spatial resolution. As a proof of concept, an integrated multistep paper-based electrochemical biosensor was fabricated incorporating dry-stored duplex-specific nuclease, a methylene blue-labeled DNA probe, sequential reagent reconstitution, and downstream electrochemical detection for microRNA analysis. Control and interference experiments further supported the analytical response under the investigated conditions. This work demonstrates how digital additive manufacturing can extend microfluidic paper-based analytical devices (μPADs) beyond conventional patterning, providing a rapid, customizable, accessible, and scalable route toward multifunctional analytical devices for decentralized and point-of-care applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Pharmacy, University of Naples Federico II, Via D. Montesano 49, Naples80131, Italy.
- IRCCS SYNLAB SDN , Via G. Ferraris 144, Naples80146, Italy.
- College of Agricultural Engineering and Food Science, Shandong University of Technology, No. 266 Xincun Xilu, Zibo, Shandong255049, China.
- Department of Pharmaceutical Chemistry, College of Pharmacy, King Saud University, P.O. Box 2457, Riyadh11451, Saudi Arabia.
- Sbarro Institute for Cancer Research and Molecular Medicine, Center for Biotechnology, College of Science and Technology, Temple University, Philadelphia, Pennsylvania19122, United States.
- Bioelectronics Task Force, University of Naples Federico II, Via Cinthia 21, Naples80126, Italy.
ORCID-Profile: Panagiota M Kalligosfyri, Enrico Gallo, Yemin Guo, Stefano Cinti
Förderung
- Royal Society of Chemistry
- King Saud University
- Associazione Italiana per la Ricerca sul Cancro
- Faculty of Science, Chulalongkorn University
- Ministero della Salute
- NextGenerationEU
- Fondazione Umberto Veronesi
Zitieren
APA
Kalligosfyri, P. M., Cimmino, L., Gallo, E., Guo, Y., Darwish, I. A., Alrubia, S., & Cinti, S. (2026). 3D Printing as a New Solution for Paper-Based Device Manufacturing: On-Demand Wax 3D Printing for Integrated Microfluidic Reagent Delivery, Sample Treatment, and Biosensing. ACS Sensors. https://doi.org/10.1021/acssensors.6c03814
Vancouver
Kalligosfyri PM, Cimmino L, Gallo E, Guo Y, Darwish IA, Alrubia S, et al. 3D Printing as a New Solution for Paper-Based Device Manufacturing: On-Demand Wax 3D Printing for Integrated Microfluidic Reagent Delivery, Sample Treatment, and Biosensing. ACS Sensors. 2026. doi:10.1021/acssensors.6c03814
BibTeX
@article{Kalligosfyri2026,
author = {Kalligosfyri, Panagiota M and Cimmino, Luca and Gallo, Enrico and Guo, Yemin and Darwish, Ibrahim A and Alrubia, Sarah and Cinti, Stefano},
title = {3D Printing as a New Solution for Paper-Based Device Manufacturing: On-Demand Wax 3D Printing for Integrated Microfluidic Reagent Delivery, Sample Treatment, and Biosensing},
journal = {ACS Sensors},
year = {2026},
doi = {10.1021/acssensors.6c03814}
}
EUVIMED