EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Functionally graded 3D-printed composite materials with tailorable anisotropy: nozzle oscillation infill pattern

Kaan Nuhoglu, Vikas Varshney, Emrah Celik

Progress in Additive Manufacturing · 2026-10 · 11 (10) · 10163-10179

DOI: 10.1007/s40964-026-01892-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 03.08.2026. Verfasst von Kaan Nuhoglu und 2 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance gains enabled by enhanced microstructural control continue to position additive manufacturing as a technology beyond conventional fabrication techniques. In this work, a novel manufacturing approach is introduced to enhance energy absorption without compromising strength in functionally graded carbon fiber–reinforced composites. By employing oscillatory infill patterns, the method provides a new means of controlling the anisotropy ratio through tailored microstructural orientation of carbon fibers across the composite. This enables the simultaneous achievement of flexibility and high mechanical performance. To demonstrate in-situ stiffness tailoring, functionally graded flexural specimens composed of thermoset epoxy-based carbon fiber composites were fabricated via 3D printing and subjected to mechanical testing. The results indicate an average 10% increase in energy absorption, with no significant reduction in maximum strength. These findings highlight the potential of additive manufacturing to enable spatially controlled stiffness in aerospace structures under bending, reducing the need for additional structural design complexity.

Zitieren

APA

Nuhoglu, K., Varshney, V., & Celik, E. (2026). Functionally graded 3D-printed composite materials with tailorable anisotropy: nozzle oscillation infill pattern. Progress in Additive Manufacturing, 11(10), 10163-10179. https://doi.org/10.1007/s40964-026-01892-5

Vancouver

Nuhoglu K, Varshney V, Celik E. Functionally graded 3D-printed composite materials with tailorable anisotropy: nozzle oscillation infill pattern. Progress in Additive Manufacturing. 2026;11(10):10163-10179. doi:10.1007/s40964-026-01892-5

BibTeX
@article{Nuhoglu2026,
  author = {Nuhoglu, Kaan and Varshney, Vikas and Celik, Emrah},
  title = {Functionally graded 3D-printed composite materials with tailorable anisotropy: nozzle oscillation infill pattern},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {10},
  pages = {10163--10179},
  doi = {10.1007/s40964-026-01892-5}
}
Kostenlos starten →