Activated Carbon as an Adsorbent for CO 2 Capture: Adsorption, Kinetics, and RSM Modeling
ACS Omega · 2024-01-16 · 9 (2) · 2080-2087
DOI: 10.1021/acsomega.3c02476 ↗At a glance
Journal article in ACS Omega, published online on 2023-12-29. Written by Hedi Jedli and 5 co-authors. Institution: University of Monastir, National Engineering School of Monastir, Laboratory of Studies of Thermal Systems and Energy, LR99ES31, Monastir 5019, Tunisi…. Cited 96 times so far (Crossref); 28 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Princess Nourah Bint Abdulrahman University.
Abstract (original language)
The main objective of this research is to investigate the adsorption isotherms and the optimization of the carbon dioxide (CO2) adsorption process on activated carbon (AC). The AC has been characterized by X-ray diffraction, scanning electron microscopy, and nitrogen (N2) adsorption-desorption. The CO2 isotherms measured under three adsorption temperatures (318, 308, and 298 K) were investigated by the Langmuir and linear driving force model. It is found that the Langmuir model could well predict the adsorption behavior of AC with a correlation factor of about 0.99. The kinetic model shows that the amount of CO2 increases at higher pressures. The response surface methodology (RSM) was applied to investigate the effects of process variables and their interaction on the response to reach the optimal conditions. Based on the analysis of variance, pressure and temperature are the main factors influencing the CO2 adsorption capacity. The effective parameters obtained through this model are found to have a value of p < 0.05. In addition, a semiempirical correlation was developed under the optimal operating conditions which are 25 °C and 9 bar. The results indicated that RSM models provide an effective method for evaluating CO2 adsorption. These results point that AC is a potential adsorbent for CO2 capture.
Authors and institutions
- University of Monastir, National Engineering School of Monastir, Laboratory of Studies of Thermal Systems and Energy, LR99ES31, Monastir 5019, Tunisia.
- Physics Department, Faculty of Science, Princess Nourah Bint Abdulrahman University, Riyadh 11671, Saudi Arabia.
- Department of Physics, Faculty of Science, Al-Baha University, Alaqiq 65779-7738, Saudi Arabia.
- Research Laboratory: Assymetric Synthesis and Molecular Engineering of Materials for Organic Electronic (LR18ES19), Monastir University-Tunisia, Monastir, 5000, Tunisia.
- University of Sousse, Higher Institute of Transportation and Logistics, P.O. Box 247, Sousse 4023, Tunisia.
ORCID profiles: Hedi Jedli
Funding
- Princess Nourah Bint Abdulrahman University
Cite
APA
Jedli, H., Almonnef, M., Rabhi, R., Mbarek, M., Abdessalem, J., & Slimi, K. (2024). Activated Carbon as an Adsorbent for CO 2 Capture: Adsorption, Kinetics, and RSM Modeling. ACS Omega, 9(2), 2080-2087. https://doi.org/10.1021/acsomega.3c02476
Vancouver
Jedli H, Almonnef M, Rabhi R, Mbarek M, Abdessalem J, Slimi K. Activated Carbon as an Adsorbent for CO 2 Capture: Adsorption, Kinetics, and RSM Modeling. ACS Omega. 2024;9(2):2080-2087. doi:10.1021/acsomega.3c02476
BibTeX
@article{Jedli2024,
author = {Jedli, Hedi and Almonnef, Maha and Rabhi, Raja and Mbarek, Mohamed and Abdessalem, Jbara and Slimi, Khalifa},
title = {Activated Carbon as an Adsorbent for CO 2 Capture: Adsorption, Kinetics, and RSM Modeling},
journal = {ACS Omega},
year = {2024},
volume = {9},
number = {2},
pages = {2080--2087},
doi = {10.1021/acsomega.3c02476}
}
EUVIMED