EUVIMEDEUVIMED entdecken
Crossref

Coupled Low-Temperature Precarbonization and Activation for Constructing Ultramicropore-Dominant Coal-Derived Carbon Adsorbent for High-Capacity CO 2 Adsorption Capture

Xiaohan Zhou, Fei Sun, Zhibin Qu, Yingjian Chen, Yang Yu, Chunwei Zhang, Junfeng Li, Min Xie, Shaozeng Sun

Energy & Fuels · 05.11.2026

DOI: 10.1021/acs.energyfuels.6c04082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 05.11.2026. Verfasst von Xiaohan Zhou und 8 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: National Natural Science Fund for Excellent Young Scholars.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous carbons from thermochemical activation of heavy carbon feedstocks are promising cost-effective adsorbents for CO2 adsorption capture, in which constructing ultramicropores commensurate with CO2 kinetic diameter is pivotal for achieving high adsorption capacity. Chemical activation involving high-temperature carbonization and activation remains a prevailing route to preparing porous carbon with high specific surface area; however, uncontrolled intense etching reactions at high temperatures inevitably create excessively widened pores that are ineffective for CO2 adsorption, giving rise to limited CO2 uptake. Herein, we proposed a modified strategy coupling low-temperature thermal activation and precarbonization to selectively develop ultramicropores in coal-derived porous carbon. Enabled by this strategy, a high ultramicropore volume of 0.55 cm3/g was constructed, along with a smaller average pore diameter, surpassing the levels achievable by conventional high-temperature chemical activation methods. Statistical analysis of multidimensional structural characteristics reveals that small carbon crystallites formed via the primary thermal pyrolysis of aromatic sheets during low-temperature precarbonization play a key role in ultramicropore development by improving interfacial mass transfer and reactions during low-temperature activation. Benefiting from its well-developed ultramicroporosity, as-prepared porous carbon adsorbent delivers a CO2 uptake of 4.69 mmol/g at 25 °C and 1 bar, ranking among the highest values reported to date for porous carbon adsorbents. This work established a simple approach that markedly improves pore architecture by only adjusting carbonization and activation parameters, enabling rational adaptation to diverse application scenarios.

Förderung

  • National Natural Science Fund for Excellent Young Scholars

Zitieren

APA

Zhou, X., Sun, F., Qu, Z., Chen, Y., Yu, Y., Zhang, C., Li, J., Xie, M., & Sun, S. (2026). Coupled Low-Temperature Precarbonization and Activation for Constructing Ultramicropore-Dominant Coal-Derived Carbon Adsorbent for High-Capacity CO 2 Adsorption Capture. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.6c04082

Vancouver

Zhou X, Sun F, Qu Z, Chen Y, Yu Y, Zhang C, et al. Coupled Low-Temperature Precarbonization and Activation for Constructing Ultramicropore-Dominant Coal-Derived Carbon Adsorbent for High-Capacity CO 2 Adsorption Capture. Energy & Fuels. 2026. doi:10.1021/acs.energyfuels.6c04082

BibTeX
@article{Zhou2026,
  author = {Zhou, Xiaohan and Sun, Fei and Qu, Zhibin and Chen, Yingjian and Yu, Yang and Zhang, Chunwei and Li, Junfeng and Xie, Min and Sun, Shaozeng},
  title = {Coupled Low-Temperature Precarbonization and Activation for Constructing Ultramicropore-Dominant Coal-Derived Carbon Adsorbent for High-Capacity CO 2 Adsorption Capture},
  journal = {Energy & Fuels},
  year = {2026},
  doi = {10.1021/acs.energyfuels.6c04082}
}
Kostenlos starten →