High-Strength and Durable Functionalized PMMA/MPS-SiO2/CNF Nanocomposite for a Photocurable 3D-Printed Dental Material
ACS Biomaterials Science & Engineering · 2026
DOI: 10.1021/acsbiomaterials.6c00466 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2026. Verfasst von Priyanka Chaudhary und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering and Biochemical Technology R&D Center, Ming Chi University of Technology, New Taipei City 24301, Taiwan. Hauptthemen laut MEDLINE: Silicon Dioxide, Nanocomposites, Polymethyl Methacrylate, Printing, Three-Dimensional. Die Arbeit nennt 26 Literaturangaben. Gefördert von: National Science and Technology Council.
Abstract (Originalsprache)
This work reports the preparation of a fibrous nanocomposite based on a poly(methyl methacryl/SiO2) nanocomposite and cellulose nanofiber (CNF) (PMECS) for a photocurable 3D-printed dental material. The PME-based resin was prepared by mixing methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDMA), and PMMA powder. Incorporation of acrylate functionalized SiO2 nanoparticles and CNF nanofibers into the PMMA matrix further improved the mechanical performance of the composites. The photocuring process promoted rapid polymerization, minimized defects, and enhanced dimensional stability. The resin was fabricated into incisor-shaped artificial teeth using stereolithography (SLA). Mechanical evaluation by Vickers hardness testing (HV) revealed a substantial increase in hardness from the neat resin PME (36 ± 3.8 HV) and PME/CNF (PMEC, 45 ± 2.4 HV) to the optimized PMECS65 hybrid composite (126.11 ± 4.3 HV). Notably, the 3D-printed teeth exhibited the highest hardness value (195 ± 5.4 HV), attributed to their enhanced interconnected fibrous morphology. Cytotoxicity tests confirmed the biocompatibility of the composites. These findings demonstrate that the fibrous PMECS resin significantly enhances the long-term strength and reliability of 3D-printed prosthetic dental strategies, making it an ideal material for high-end restorative dentistry.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Materials Engineering and Biochemical Technology R&D Center, Ming Chi University of Technology, New Taipei City 24301, Taiwan.
- Department of Materials Science and Engineering, National Taiwan University, Taipei 10617, Taiwan.
- Department of Chemical and Materials Engineering, Chang Gung University, Taoyuan 33302, Taiwan.
ORCID-Profile: Priyanka Chaudhary, Wei-Fang Su, Yu-Ching Huang, Meng-Fang Lin
Förderung
- National Science and Technology Council
Zitieren
APA
Chaudhary, P., Chung, T. Y., Tsai, C. M., Su, W. F., Huang, Y. C., & Lin, M. F. (2026). High-Strength and Durable Functionalized PMMA/MPS-SiO2/CNF Nanocomposite for a Photocurable 3D-Printed Dental Material. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.6c00466
Vancouver
Chaudhary P, Chung TY, Tsai CM, Su WF, Huang YC, Lin MF. High-Strength and Durable Functionalized PMMA/MPS-SiO2/CNF Nanocomposite for a Photocurable 3D-Printed Dental Material. ACS Biomaterials Science & Engineering. 2026. doi:10.1021/acsbiomaterials.6c00466
BibTeX
@article{Chaudhary2026,
author = {Chaudhary, Priyanka and Chung, Tsui-Yun and Tsai, Chieh-Ming and Su, Wei-Fang and Huang, Yu-Ching and Lin, Meng-Fang},
title = {High-Strength and Durable Functionalized PMMA/MPS-SiO2/CNF Nanocomposite for a Photocurable 3D-Printed Dental Material},
journal = {ACS Biomaterials Science & Engineering},
year = {2026},
doi = {10.1021/acsbiomaterials.6c00466}
}
EUVIMED