High Power Factor in Polycrystalline InGaSb Thin Films via Nanoscale Compositional Fluctuations
ACS Applied Materials & Interfaces · 2026-08-05 · 18 (30) · 41158-41165
DOI: 10.1021/acsami.6c04801 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2026-07-21. Written by Takamitsu Ishiyama and 5 co-authors. Institution: Research Institute for Energy Efficient Technologies, AIST, 1-1-1 Umezono, Tsukuba, Ibaraki305-8568, Japan. 56 references. Funded by: Japan Society for the Promotion of Science, TEPCO Memorial Foundation, Fusion Oriented REsearch for disruptive Science and Technology.
Abstract (original language)
III–V compound semiconductors are promising candidates for thin-film thermoelectric materials because their narrow-bandgap alloys can exhibit a thermoelectric response near room temperature. In this study, we systematically investigated polycrystalline InGaSb thin films deposited on glass substrates and identified the deposition temperature and In flux as key parameters governing phase competition and nanoscale compositional fluctuations. By modulating the In supply, discontinuous In-rich precipitates were formed while the matrix composition was systematically tuned. Variation of the deposition temperature further enabled control of structural disorder and nanoscale features, as evaluated by Raman analyses. At the highest deposition temperature (560 °C) that maintained continuous films, increased disorder correlated with an enhanced Seebeck coefficient without a significant reduction in electrical conductivity. As a result, a high power factor of 1200 µW m–1 K–2 was achieved near room temperature. These findings demonstrate that growth-parameter-driven microstructure and phase control provide an effective strategy for enhancing thermoelectric performance in multicomponent polycrystalline III–V thin films.
Subjects
Author keywords
Authors and institutions
- Research Institute for Energy Efficient Technologies, AIST, 1-1-1 Umezono, Tsukuba, Ibaraki305-8568, Japan.
- Institute of Applied Physics, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki305-8573, Japan.
- Research Institute of Core Technology for Material Innovation, AIST, 1-1-1 Higashi, Tsukuba, Ibaraki305-8565, Japan.
- Zero-Emission Research Planning Office, AIST, 1-1-1 Umezono, Tsukuba, Ibaraki305-8560, Japan.
- Tsukuba Institute for Advanced Research (TIAR), University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki305-8577, Japan.
ORCID profiles: Takamitsu Ishiyama, Akira Ogawa, Takashi Suemasu, Kaoru Toko
Funding
- Japan Society for the Promotion of Science
- TEPCO Memorial Foundation
- Fusion Oriented REsearch for disruptive Science and Technology
- JACI Prize for Outstanding Achievements
Cite
APA
Ishiyama, T., Ogawa, A., Saitoh, N., Yoshizawa, N., Suemasu, T., & Toko, K. (2026). High Power Factor in Polycrystalline InGaSb Thin Films via Nanoscale Compositional Fluctuations. ACS Applied Materials & Interfaces, 18(30), 41158-41165. https://doi.org/10.1021/acsami.6c04801
Vancouver
Ishiyama T, Ogawa A, Saitoh N, Yoshizawa N, Suemasu T, Toko K. High Power Factor in Polycrystalline InGaSb Thin Films via Nanoscale Compositional Fluctuations. ACS Applied Materials & Interfaces. 2026;18(30):41158-41165. doi:10.1021/acsami.6c04801
BibTeX
@article{Ishiyama2026,
author = {Ishiyama, Takamitsu and Ogawa, Akira and Saitoh, Noriyuki and Yoshizawa, Noriko and Suemasu, Takashi and Toko, Kaoru},
title = {High Power Factor in Polycrystalline InGaSb Thin Films via Nanoscale Compositional Fluctuations},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {30},
pages = {41158--41165},
doi = {10.1021/acsami.6c04801}
}
EUVIMED