Unusual Spectrally Reproducible and High Q‐Factor Random Lasing in Polycrystalline Tin Perovskite Films
Advanced Materials · 2023-03 · 35 (9)
DOI: 10.1002/adma.202208293 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 03.01.2023. Verfasst von Vladimir S Chirvony und 6 weiteren Autor:innen. Beteiligte Einrichtung: UMDO, Instituto de Ciencia de los Materiales, Universidad de Valencia, Valencia, 46980, Spain. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Horizon 2020 research and innovation program, Ministry of Science and Innovation of Spain.
Abstract (Originalsprache)
An unusual spectrally reproducible near‐IR random lasing (RL) with no fluctuation of lasing peak wavelength is disclosed in polycrystalline films of formamidinium tin triiodide perovskite, which have been chemically stabilized against Sn 2+ to Sn 4+ oxidation. Remarkably, a quality Q‐factor as high as ≈10 4 with an amplified spontaneous emission (ASE) threshold as low as 2 µJ cm −2 (both at 20 K) are achieved. The observed spectral reproducibility is unprecedented for semiconductor thin film RL systems and cannot be explained by the strong spatial localization of lasing modes. Instead, it is suggested that the spectral stability is a result of such an unique property of Sn‐based perovskites as a large inhomogeneous broadening of the emitting centers, which is a consequence of an intrinsic structural inhomogeneity of the material. Due to this, lasing can occur simultaneously in modes that are spatially strongly overlapped, as long as the spectral separation between the modes is larger than the homogeneous linewidth of the emitting centers. The discovered mechanism of RL spectral stability in semiconductor materials, possessing inhomogeneous broadening, opens up prospects for their practical use as cheap sources of narrow laser lines.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- UMDO, Instituto de Ciencia de los Materiales, Universidad de Valencia, Valencia, 46980, Spain.
- Escuela Técnica Superior de Ingeniería, Universidad de Valencia, Valencia, 46100, Spain.
- Institute of Advanced Materials (INAM), Universitat Jaume I, Castelló de la Plana, Castelló, 12006, Spain.
- Facultad de Química, Universidad Nacional Autónoma de México, Coyoacán, Ciudad de México, 04510, Mexico.
ORCID-Profile: Vladimir S Chirvony, Isaac Suárez, Rafael S Sánchez, Iván Mora-Seró, Juan P Martínez-Pastor
Förderung
- Horizon 2020 research and innovation program
- Ministry of Science and Innovation of Spain
Zitieren
APA
Chirvony, V. S., Suárez, I., Sanchez-Diaz, J., Sánchez, R. S., Rodríguez-Romero, J., Mora-Seró, I., & Martínez-Pastor, J. P. (2023). Unusual Spectrally Reproducible and High Q‐Factor Random Lasing in Polycrystalline Tin Perovskite Films. Advanced Materials, 35(9). https://doi.org/10.1002/adma.202208293
Vancouver
Chirvony VS, Suárez I, Sanchez-Diaz J, Sánchez RS, Rodríguez-Romero J, Mora-Seró I, et al. Unusual Spectrally Reproducible and High Q‐Factor Random Lasing in Polycrystalline Tin Perovskite Films. Advanced Materials. 2023;35(9). doi:10.1002/adma.202208293
BibTeX
@article{Chirvony2023,
author = {Chirvony, Vladimir S and Suárez, Isaac and Sanchez-Diaz, Jesus and Sánchez, Rafael S and Rodríguez-Romero, Jesús and Mora-Seró, Iván and Martínez-Pastor, Juan P},
title = {Unusual Spectrally Reproducible and High Q‐Factor Random Lasing in Polycrystalline Tin Perovskite Films},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {9},
doi = {10.1002/adma.202208293}
}
EUVIMED