EUVIMEDSkopri EUVIMED
Crossref

A Highly Stable MXene Aqueous Conductive Ink for Inkjet Printing Flexible Microsupercapacitors

Wei Cao, Pingping Gong, Weiwei Wang iD, Junli Nie, Guangchen Wang, Mingsheng Wang, Peng Yu, Caiming Li, Ziyi Zhang, Jing Sun, Peng Zhong iD, Yue Hao and 1 more

ACS Applied Materials & Interfaces · 2026-05-06 · 18 (17) · 24728-24741

DOI: 10.1021/acsami.6c03460 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2026-04-21. Written by Wei Cao and 12 co-authors. Institution: School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, China. Cited 7 times so far (Crossref); 69 references. Funded by: Fundamental Research Funds for the Central Universities, Xidian University Specially Funded Project for Interdisciplinary Exploration, Postgraduate Innovation Fund of Xidian University.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Recently, MXene-based microsupercapacitors (MSCs) prepared by inkjet printing have attracted great attention due to their potential applications in portable and wearable electronics. Although the aqueous MXene inks are more eco-friendly than their organic counterparts, their practical applications seriously suffer from the poor stability of MXene in water. In this work, a high-stability aqueous ink is developed by grafting sodium dodecyl sulfate (SDS) onto the surface of MXene. The SDS molecules firmly adsorb on MXene in a parallel configuration through electrostatic interactions and hydrogen bonding, thereby inhibiting the agglomeration of MXene nanoflakes and protecting the defective sites from water and oxygen. Thus, the dispersion and structural stabilities of the SDS-MXene ink are substantially promoted compared with those of the pristine MXene ink. The lifetime constant of the SDS-MXene ink is estimated to be 157.3 days, while that of the pristine MXene ink is only 22.1 days. Furthermore, the interdigital electrodes are prepared on the flexible polyethylene terephthalate substrates by inkjet printing using a home printer, with a high resolution (150 μm), high conductivity (1091 S/cm), and controllable thicknesses. The assembled MSCs using the SDS-MXene ink shows greatly enhanced electrochemical performance than that of the devices using the pristine MXene ink, with the volume capacitances increasing from 177 F/cm3 to 714.3 F/cm3, which is mainly attributed to expanded ion transport channels, increased active sites, and maintained high conductivity. Besides, the MSCs derived from the ink aged for 60 days still have a similar performance to that of the device from the fresh ink. Finally, the MSCs also show impressive flexibility and an adjustable voltage window. The present work provides a basic formula of a highly stable aqueous MXene ink, which can be further modified to match the manufacturing requirements of different electronic devices such as sensors, batteries, and electric circuits.

Subjects

Author keywords

MXeneinkjet printingmicrosupercapacitorssodium dodecyl sulfatestability

Authors and institutions

  • School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, China.
  • Key Lab of Wide Band-Gap Semiconductor Materials and Devices, Xidian University, Xi'an 710126, China.
  • Guangzhou Institute of Technology, Xidian University, Guangzhou 510555, China.

ORCID profiles: Weiwei Wang, Peng Zhong

Funding

  • Fundamental Research Funds for the Central Universities
  • Xidian University Specially Funded Project for Interdisciplinary Exploration
  • Postgraduate Innovation Fund of Xidian University
  • National Natural Science Foundation of China (NSFC)

Cite

APA

Cao, W., Gong, P., Wang, W., Nie, J., Wang, G., Wang, M., Yu, P., Li, C., Zhang, Z., Sun, J., Zhong, P., Hao, Y., & Ma, X. (2026). A Highly Stable MXene Aqueous Conductive Ink for Inkjet Printing Flexible Microsupercapacitors. ACS Applied Materials & Interfaces, 18(17), 24728-24741. https://doi.org/10.1021/acsami.6c03460

Vancouver

Cao W, Gong P, Wang W, Nie J, Wang G, Wang M, et al. A Highly Stable MXene Aqueous Conductive Ink for Inkjet Printing Flexible Microsupercapacitors. ACS Applied Materials & Interfaces. 2026;18(17):24728-24741. doi:10.1021/acsami.6c03460

BibTeX
@article{Cao2026,
  author = {Cao, Wei and Gong, Pingping and Wang, Weiwei and Nie, Junli and Wang, Guangchen and Wang, Mingsheng and Yu, Peng and Li, Caiming and Zhang, Ziyi and Sun, Jing and Zhong, Peng and Hao, Yue and Ma, Xiaohua},
  title = {A Highly Stable MXene Aqueous Conductive Ink for Inkjet Printing Flexible Microsupercapacitors},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {17},
  pages = {24728--24741},
  doi = {10.1021/acsami.6c03460}
}
Start for free →