Rheological Properties and Inkjet Printability of a Green Silver-Based Conductive Ink for Wearable Flexible Textile Antennas
Sensors · 05.05.2024 · 24 (9) · 2938
DOI: 10.3390/s24092938 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 05.05.2024. Verfasst von Abdelkrim Boumegnane und 7 weiteren Autor:innen. Beteiligte Einrichtung: Organic Synthesis and Extraction Laboratory (OSEV), Ain Chock's Faculty of Sciences, Hassan II University, Casablanca B.P 5366, Morocco. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The development of e-textiles necessitates the creation of highly conductive inks that are compatible with precise inkjet printing, which remains a key challenge. This work presents an innovative, syringe-based method to optimize a novel bio-sourced silver ink for inkjet printing on textiles. We investigate the relationships between inks’ composition, rheological properties, and printing behavior, ultimately assessing the electrical performance of the fabricated circuits. Using Na–alginate and polyethylene glycol (PEG) as the suspension matrix, we demonstrate their viscosity depends on the component ratios. Rheological control of the silver nanoparticle-laden ink has become paramount for uniform printing on textiles. A specific formulation (3 wt.% AgNPs, 20 wt.% Na–alginate, 40 wt.% PEG, and 40 wt.% solvent) exhibits the optimal rheology, enabling the printing of 0.1 mm thick conductive lines with a low resistivity (8 × 10−3 Ω/cm). Our findings pave the way for designing eco-friendly ink formulations that are suitable for inkjet printing flexible antennas and other electronic circuits onto textiles, opening up exciting possibilities for the next generation of E-textiles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Organic Synthesis and Extraction Laboratory (OSEV), Ain Chock's Faculty of Sciences, Hassan II University, Casablanca B.P 5366, Morocco.
- Textile Materials Research Laboratory (REMTEX), Higher School of Textile and Clothing Industries (ESITH), Casablanca 20230, Morocco.
- Laboratory of Physics of Condensed Matter (LPMC), Faculty of Sciences Ben M'Sik, Hassan II University, Casablanca 2000, Morocco.
- École Nationale Supérieure des Arts et Industries Textiles-ENSAIT, ULR 2461-GEMTEX-Génie et Matériaux Textiles, University of Lille, F-59000 Lille, France.
ORCID-Profile: Abdelkrim Boumegnane, Assia Batine, Thibault Dormois, Cédric Cochrane, Ayoub Nadi
Zitieren
APA
Boumegnane, A., Douhi, S., Batine, A., Dormois, T., Cochrane, C., Nadi, A., Cherkaoui, O., & Tahiri, M. (2024). Rheological Properties and Inkjet Printability of a Green Silver-Based Conductive Ink for Wearable Flexible Textile Antennas. Sensors, 24(9), 2938. https://doi.org/10.3390/s24092938
Vancouver
Boumegnane A, Douhi S, Batine A, Dormois T, Cochrane C, Nadi A, et al. Rheological Properties and Inkjet Printability of a Green Silver-Based Conductive Ink for Wearable Flexible Textile Antennas. Sensors. 2024;24(9):2938. doi:10.3390/s24092938
BibTeX
@article{Boumegnane2024,
author = {Boumegnane, Abdelkrim and Douhi, Said and Batine, Assia and Dormois, Thibault and Cochrane, Cédric and Nadi, Ayoub and Cherkaoui, Omar and Tahiri, Mohamed},
title = {Rheological Properties and Inkjet Printability of a Green Silver-Based Conductive Ink for Wearable Flexible Textile Antennas},
journal = {Sensors},
year = {2024},
volume = {24},
number = {9},
pages = {2938},
doi = {10.3390/s24092938}
}
EUVIMED