In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells
ACS Applied Materials & Interfaces · 20.05.2026 · 18 (19) · 27778-27789
DOI: 10.1021/acsami.6c02555 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 05.05.2026. Verfasst von Tao Xue und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic Information and Artificial Intelligence, Shaanxi University of Science and Technology, Shaanxi, Xi'an 710021, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: Shaanxi University of Science and Technology, National Natural Science Foundation of China, Shaanxi Province.
Abstract (Originalsprache)
Interface losses at the buried electron-transport-layer (ETL) side remain a key bottleneck for high-performance all-inorganic perovskite solar cells, largely arising from poor precursor wetting, uncontrolled crystallization, and defect-assisted nonradiative recombination. Here we report a solvent-free, vacuum-compatible approach by in-vacuum deposition of an ultrathin MgF2/MgO bilayer on TiO2 via electron-beam evaporation. The MgF2 sublayer improves surface wettability and precursor spreading, thereby lowering the nucleation barrier and regulating crystallization kinetics to form compact perovskite films with enlarged grains and suppressed interfacial voids. The MgO overlayer further reduces oxygen-vacancy-related defect states at the TiO2 surface and decreases interfacial trap density, as supported by the attenuated defect components in XPS and the reduced trap density extracted from space-charge-limited-current measurements. With the improved buried-interface quality, nonradiative recombination is effectively suppressed, and charge extraction/transport is accelerated, leading to reduced hysteresis and enhanced photovoltaic performance. As a result, the open-circuit voltage increases from 1.031 to 1.126 V, and the power conversion efficiency improves from 14.71 to 18.22%. Moreover, the dense inorganic bilayer enhances moisture tolerance and operational stability of unencapsulated devices. This in-vacuum, evaporation-based buried-interface engineering provides a scalable route toward efficient and stable all-inorganic perovskite photovoltaics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electronic Information and Artificial Intelligence, Shaanxi University of Science and Technology, Shaanxi, Xi'an 710021, China.
- State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an 710049, China.
ORCID-Profile: Tao Xue, Kunping Guo
Förderung
- Shaanxi University of Science and Technology
- National Natural Science Foundation of China
- Shaanxi Province
Zitieren
APA
Xue, T., Li, S., Chen, Y., Wang, B., Shen, X., Wang, X., Zhang, P., Guo, K., & Zhang, F. (2026). In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells. ACS Applied Materials & Interfaces, 18(19), 27778-27789. https://doi.org/10.1021/acsami.6c02555
Vancouver
Xue T, Li S, Chen Y, Wang B, Shen X, Wang X, et al. In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2026;18(19):27778-27789. doi:10.1021/acsami.6c02555
BibTeX
@article{Xue2026,
author = {Xue, Tao and Li, Shuangpeng and Chen, Yuchang and Wang, Baokun and Shen, Xinwei and Wang, Xiao and Zhang, Pengfei and Guo, Kunping and Zhang, Fanghui},
title = {In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {19},
pages = {27778--27789},
doi = {10.1021/acsami.6c02555}
}
EUVIMED