EUVIMEDOpdag EUVIMED
Crossref

In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells

Tao Xue iD, Shuangpeng Li, Yuchang Chen, Baokun Wang, Xinwei Shen, Xiao Wang, Pengfei Zhang, Kunping Guo iD, Fanghui Zhang

ACS Applied Materials & Interfaces · 2026-05-20 · 18 (19) · 27778-27789

DOI: 10.1021/acsami.6c02555 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2026-05-05. Written by Tao Xue and 8 co-authors. Institution: School of Electronic Information and Artificial Intelligence, Shaanxi University of Science and Technology, Shaanxi, Xi'an 710021, China. Cited 2 times so far (Crossref); 58 references. Funded by: Shaanxi University of Science and Technology, National Natural Science Foundation of China, Shaanxi Province.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Interface losses at the buried electron-transport-layer (ETL) side remain a key bottleneck for high-performance all-inorganic perovskite solar cells, largely arising from poor precursor wetting, uncontrolled crystallization, and defect-assisted nonradiative recombination. Here we report a solvent-free, vacuum-compatible approach by in-vacuum deposition of an ultrathin MgF2/MgO bilayer on TiO2 via electron-beam evaporation. The MgF2 sublayer improves surface wettability and precursor spreading, thereby lowering the nucleation barrier and regulating crystallization kinetics to form compact perovskite films with enlarged grains and suppressed interfacial voids. The MgO overlayer further reduces oxygen-vacancy-related defect states at the TiO2 surface and decreases interfacial trap density, as supported by the attenuated defect components in XPS and the reduced trap density extracted from space-charge-limited-current measurements. With the improved buried-interface quality, nonradiative recombination is effectively suppressed, and charge extraction/transport is accelerated, leading to reduced hysteresis and enhanced photovoltaic performance. As a result, the open-circuit voltage increases from 1.031 to 1.126 V, and the power conversion efficiency improves from 14.71 to 18.22%. Moreover, the dense inorganic bilayer enhances moisture tolerance and operational stability of unencapsulated devices. This in-vacuum, evaporation-based buried-interface engineering provides a scalable route toward efficient and stable all-inorganic perovskite photovoltaics.

Subjects

Author keywords

all-inorganic perovskite solar cellsburied interfacecrystallization kineticsdefect passivationelectron-beam evaporationvacuum deposition

Authors and institutions

  • School of Electronic Information and Artificial Intelligence, Shaanxi University of Science and Technology, Shaanxi, Xi'an 710021, China.
  • State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an 710049, China.

ORCID profiles: Tao Xue, Kunping Guo

Funding

  • Shaanxi University of Science and Technology
  • National Natural Science Foundation of China
  • Shaanxi Province

Cite

APA

Xue, T., Li, S., Chen, Y., Wang, B., Shen, X., Wang, X., Zhang, P., Guo, K., & Zhang, F. (2026). In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells. ACS Applied Materials & Interfaces, 18(19), 27778-27789. https://doi.org/10.1021/acsami.6c02555

Vancouver

Xue T, Li S, Chen Y, Wang B, Shen X, Wang X, et al. In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2026;18(19):27778-27789. doi:10.1021/acsami.6c02555

BibTeX
@article{Xue2026,
  author = {Xue, Tao and Li, Shuangpeng and Chen, Yuchang and Wang, Baokun and Shen, Xinwei and Wang, Xiao and Zhang, Pengfei and Guo, Kunping and Zhang, Fanghui},
  title = {In-Vacuum Electron-Beam-Evaporated MgF 2 /MgO Bilayer on TiO 2 Boosts Efficiency and Stability in All-Inorganic Perovskite Solar Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {19},
  pages = {27778--27789},
  doi = {10.1021/acsami.6c02555}
}
Start for free →