Controlling the Hole Injection Dynamics of Hole-Transporting Polymers for Efficient Quantum Dot Light-Emitting Diodes
ACS Applied Materials & Interfaces · 2026-01-28 · 18 (3) · 5552-5564
DOI: 10.1021/acsami.5c19589 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2026-01-19. Written by San Seomun and 11 co-authors. Institution: Division of Advanced Materials, Korea Research Institute of Chemical Technology (KRICT), Daejeon 34114, Republic of Korea. Cited 7 times so far (Crossref); 68 references. Funded by: Korea Research Institute of Chemical Technology, National Research Foundation of Korea.
Abstract (original language)
-butylphenyl))diphenylamine)] (TFB) as the hole transport layer (HTL). However, the relatively high highest occupied molecular orbital (HOMO) energy level of the TFB hinders hole transfer into emitting layers (EMLs). In this study, we introduce fluorine (F) as a weak electron-withdrawing group (EWG) and the cyano group (CN) as a strong EWG into triphenylamine units of TFB to reduce the energy offset between HTLs and EMLs. Fluorination selectively downshifts HOMO energy levels and slightly improves the hole mobility of the TFB derivatives, leading to a significant enhancement of the external quantum efficiencies (EQEs) in red-emissive CdSe and blue-emissive ZnSe QD-LEDs. Specifically, using difluorinated TFB (2F-TFB) as HTLs in the red and blue QD-LED devices improves EQE to 17.4% and 10.6%, compared to the conventional TFB-based devices with EQEs of 13.3% and 5.0%, respectively. However, the devices with the TFB derivative incorporating CN (CN-TFB) show poor EQEs of 8.1% and 0.5% for the red and blue devices, respectively, due to the reduced hole mobility of CN-TFB and, in the blue devices, to enhanced electron leakage from the EMLs into the HTLs. The results show that beyond deepening the HTL HOMO to lower the hole injection barrier at the HTL/EML interface, effective HTL design must also balance hole mobility and electron blocking in order to maintain charge balance in QD-LEDs.
Subjects
Author keywords
Authors and institutions
- Division of Advanced Materials, Korea Research Institute of Chemical Technology (KRICT), Daejeon 34114, Republic of Korea.
- Division of Materials Science and Engineering, Hanyang University, Seoul 04763, Republic of Korea.
- Chemical Materials Solutions Center, Korea Research Institute of Chemical Technology (KRICT), Daejeon 34114, Republic of Korea.
- Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea.
- Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon 34113, Republic of Korea.
ORCID profiles: Ji Yeon Ryu, Han-Hee Cho, Sungmook Jung, Nuri Oh, Su Yeon Lee, Taesu Kim
Funding
- Korea Research Institute of Chemical Technology
- National Research Foundation of Korea
Cite
APA
Seomun, S., Choi, S. G., Ryu, J. Y., Kim, I., Kim, H., Cho, H. H., Choi, Y., Jung, S., Kim, T. Y., Oh, N., Lee, S. Y., & Kim, T. (2026). Controlling the Hole Injection Dynamics of Hole-Transporting Polymers for Efficient Quantum Dot Light-Emitting Diodes. ACS Applied Materials & Interfaces, 18(3), 5552-5564. https://doi.org/10.1021/acsami.5c19589
Vancouver
Seomun S, Choi SG, Ryu JY, Kim I, Kim H, Cho HH, et al. Controlling the Hole Injection Dynamics of Hole-Transporting Polymers for Efficient Quantum Dot Light-Emitting Diodes. ACS Applied Materials & Interfaces. 2026;18(3):5552-5564. doi:10.1021/acsami.5c19589
BibTeX
@article{Seomun2026,
author = {Seomun, San and Choi, Sun-Gi and Ryu, Ji Yeon and Kim, In and Kim, Hyuna and Cho, Han-Hee and Choi, Youngmin and Jung, Sungmook and Kim, Tae Yeon and Oh, Nuri and Lee, Su Yeon and Kim, Taesu},
title = {Controlling the Hole Injection Dynamics of Hole-Transporting Polymers for Efficient Quantum Dot Light-Emitting Diodes},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {3},
pages = {5552--5564},
doi = {10.1021/acsami.5c19589}
}
EUVIMED