EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Highly Efficient All-Solution-Processed Quantum Dot Light-Emitting Diodes Using MoOx Nanoparticle Hole Injection Layer

Ji-Hun Yang, Gyeong-Pil Jang, Su-Young Kim, Young-Bin Chae, Kyoung-Ho Lee, Dae-Gyu Moon, Chang-Kyo Kim iD

Nanomaterials · 12.08.2023 · 13 (16) · 2324

DOI: 10.3390/nano13162324 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 12.08.2023. Verfasst von Ji-Hun Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Materials, Devices and Equipment Engineering, Soonchunhyang University, Asan 31538, Chungnam, Republic of Korea. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Soonchunhyang University, Korea Institute for Advancement of Technology, Ministry of Trade, Industry, and Energy of Korea, Soonchunhyang University Research Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a study that aims to enhance the performance of quantum dot light-emitting didoes (QLEDs) by employing a solution-processed molybdenum oxide (MoOx) nanoparticle (NP) as a hole injection layer (HIL). The study investigates the impact of varying the concentrations of the MoOx NP layer on device characteristics and delves into the underlying mechanisms that contribute to the observed enhancements. Experimental techniques such as an X-ray diffraction and field-emission transmission electron microscopy were employed to confirm the formation of MoOx NPs during the synthesis process. Ultraviolet photoelectron spectroscopy was employed to analyze the electron structure of the QLEDs. Remarkable enhancements in device performance were achieved for the QLED by employing an 8 mg/mL concentration of MoOx nanoparticles. This configuration attains a maximum luminance of 69,240.7 cd/cm2, a maximum current efficiency of 56.0 cd/A, and a maximum external quantum efficiency (EQE) of 13.2%. The obtained results signify notable progress in comparison to those for QLED without HIL, and studies that utilize the widely used poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) HIL. They exhibit a remarkable enhancements of 59.5% and 26.4% in maximum current efficiency, respectively, as well as significant improvements of 42.7% and 20.0% in maximum EQE, respectively. This study opens up new possibilities for the selection of HIL and the fabrication of solution-processed QLEDs, contributing to the potential commercialization of these devices in the future.

Schlagwörter

Stichwörter der Autor:innen

MoO3 nanoparticlescharge balancehole injection layerquantum dot light-emitting diodesolution process

Autor:innen und Institutionen

  • Department of Electronic Materials, Devices and Equipment Engineering, Soonchunhyang University, Asan 31538, Chungnam, Republic of Korea.

ORCID-Profile: Chang-Kyo Kim

Förderung

  • Soonchunhyang University
  • Korea Institute for Advancement of Technology, Ministry of Trade, Industry, and Energy of Korea
  • Soonchunhyang University Research Fund
  • Korea Institute for Advancement of Technology (KIAT)

Zitieren

APA

Yang, J. H., Jang, G. P., Kim, S. Y., Chae, Y. B., Lee, K. H., Moon, D. G., & Kim, C. K. (2023). Highly Efficient All-Solution-Processed Quantum Dot Light-Emitting Diodes Using MoOx Nanoparticle Hole Injection Layer. Nanomaterials, 13(16), 2324. https://doi.org/10.3390/nano13162324

Vancouver

Yang JH, Jang GP, Kim SY, Chae YB, Lee KH, Moon DG, et al. Highly Efficient All-Solution-Processed Quantum Dot Light-Emitting Diodes Using MoOx Nanoparticle Hole Injection Layer. Nanomaterials. 2023;13(16):2324. doi:10.3390/nano13162324

BibTeX
@article{Yang2023,
  author = {Yang, Ji-Hun and Jang, Gyeong-Pil and Kim, Su-Young and Chae, Young-Bin and Lee, Kyoung-Ho and Moon, Dae-Gyu and Kim, Chang-Kyo},
  title = {Highly Efficient All-Solution-Processed Quantum Dot Light-Emitting Diodes Using MoOx Nanoparticle Hole Injection Layer},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {16},
  pages = {2324},
  doi = {10.3390/nano13162324}
}
Kostenlos starten →