EUVIMEDEUVIMED entdecken
Crossref

Electron Transport Layer Optimization for All-Inorganic, Vacuum-Deposited Perovskite-Based Photodiodes with Improved Reverse Bias Stability and High Speed

Athina Papadopoulou iD, Maria Isabel Pintor-Monroy iD, Sreeshma Dayaran, Irina Skvortsova, João Pedro de Sousa Gouveia Dos Anjos, Sownder Subramaniam, Wenya Song iD, Itai Lieberman, Yinghuan Kuang iD, Johan Hofkens iD, Maarten B J Roeffaers iD, Sara Bals iD und 2 weitere

ACS Applied Materials & Interfaces · 23.07.2025 · 17 (29) · 42096-42107

DOI: 10.1021/acsami.5c06812 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 11.07.2025. Verfasst von Athina Papadopoulou und 13 weiteren Autor:innen. Beteiligte Einrichtung: imec, Kapeldreef 75, Leuven 3001, Belgium. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 83 Literaturangaben. Gefördert von: Fonds Wetenschappelijk Onderzoek.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Having proven their potential as visible and near-infrared light detectors, metal halide perovskites are now being integrated with thin-film transistor- or silicon-based read-out circuits for high-resolution imaging applications. Vacuum-deposited, all-inorganic perovskite photodiodes (PePDs) offer a superior alternative to solution-processed hybrid organic–inorganic perovskites, addressing their specific limitations in semiconductor fabrication process compatibility. Specifically, vacuum processing overcomes challenges related to limited scalability and reproducibility, while the development of photodiodes made entirely of inorganic compounds improves their resilience at high-temperature environments. At the same time, the performance of vacuum-deposited, all-inorganic PePDs has proven competitive with that of their solution-processed hybrid organic–inorganic counterparts. Building on this progress, this study demonstrates that the careful tuning of the electron transport layer (ETL) can achieve a 3-fold optimization in the performance of all-inorganic, vacuum-deposited PePDs, through improvements in device performance repeatability, operational stability under reverse bias, and carrier extraction speed. Specifically, we identify that the combination of a fullerene and a metal oxide transport layer, as well as the careful tuning of their respective thicknesses, can simultaneously prevent metallic shorts, reduce the amount of interface defect states, and extend the depletion width of the photodiode. Eventually, the optimized photodiodes exhibit minimal variability in device performance, maintaining a stable dark current density below 0.1 μA/cm2 even after biasing at −2 V for 1 h. They also demonstrate a rise time below 2 μs, with results confirming the potential for sub-μs response times for further scaled-down pixel sizes.

Schlagwörter

Stichwörter der Autor:innen

inorganicperovskitephotodetectorresponse speedreverse biasstabilitythermal evaporationvariability

Autor:innen und Institutionen

  • imec, Kapeldreef 75, Leuven 3001, Belgium.
  • Department of Electrical Engineering (ESAT), KU Leuven, Kasteelpark Arenberg 10, Leuven 3001, Belgium.
  • Department of Chemistry, Faculty of Sciences, KU Leuven, Leuven 3001, Belgium.
  • Electron Microscopy for Materials Research, University of Antwerp, Antwerp 2020, Belgium.
  • i3N/CENIMAT, Department of Materials Science, Faculty of Science and Technology, Universidade NOVA de Lisboa and CEMOP/UNINOVA, Campus de Caparica, Caparica 2829-516, Portugal.
  • Max Planck Institute for Polymer Research, Mainz 55128, Germany.

ORCID-Profile: Athina Papadopoulou, Maria Isabel Pintor-Monroy, Wenya Song, Yinghuan Kuang, Johan Hofkens, Maarten B J Roeffaers, Sara Bals, Robert Gehlhaar, Jan Genoe

Förderung

  • Fonds Wetenschappelijk Onderzoek

Zitieren

APA

Papadopoulou, A., Pintor-Monroy, M. I., Dayaran, S., Skvortsova, I., de Sousa Gouveia Dos Anjos, J. P., Subramaniam, S., Song, W., Lieberman, I., Kuang, Y., Hofkens, J., Roeffaers, M. B. J., Bals, S., Gehlhaar, R., & Genoe, J. (2025). Electron Transport Layer Optimization for All-Inorganic, Vacuum-Deposited Perovskite-Based Photodiodes with Improved Reverse Bias Stability and High Speed. ACS Applied Materials & Interfaces, 17(29), 42096-42107. https://doi.org/10.1021/acsami.5c06812

Vancouver

Papadopoulou A, Pintor-Monroy MI, Dayaran S, Skvortsova I, de Sousa Gouveia Dos Anjos JP, Subramaniam S, et al. Electron Transport Layer Optimization for All-Inorganic, Vacuum-Deposited Perovskite-Based Photodiodes with Improved Reverse Bias Stability and High Speed. ACS Applied Materials & Interfaces. 2025;17(29):42096-42107. doi:10.1021/acsami.5c06812

BibTeX
@article{Papadopoulou2025,
  author = {Papadopoulou, Athina and Pintor-Monroy, Maria Isabel and Dayaran, Sreeshma and Skvortsova, Irina and de Sousa Gouveia Dos Anjos, João Pedro and Subramaniam, Sownder and Song, Wenya and Lieberman, Itai and Kuang, Yinghuan and Hofkens, Johan and Roeffaers, Maarten B J and Bals, Sara and Gehlhaar, Robert and Genoe, Jan},
  title = {Electron Transport Layer Optimization for All-Inorganic, Vacuum-Deposited Perovskite-Based Photodiodes with Improved Reverse Bias Stability and High Speed},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {29},
  pages = {42096--42107},
  doi = {10.1021/acsami.5c06812}
}
Kostenlos starten →