Low Pressure Chemical Vapor Deposited Perovskite Enables all Vacuum‐Processed Monolithic Perovskite‐Silicon Tandem Solar Cells
Advanced Energy Materials · 2025-07 · 15 (27)
DOI: 10.1002/aenm.202405377 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 08.04.2025. Verfasst von Yuxi Zhang und 11 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 75 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shanxi Provincial Key Research and Development Project.
Abstract (Originalsprache)
Low‐pressure chemical vapor deposition (CVD) is a promising technique for metal halide perovskite photovoltaics fabrication due to its low manufacturing cost, conformal coverage, and high scalability for industry‐scale fabrication. However, the lack of knowledge of the reaction kinetics makes the solar cell performance lag behind its solution‐processed counterpart. Herein, the perovskite formation and crystal growth process in the CVD process are studied by unraveling the mechanism of ion diffusion via tracking the vapor–solid reaction with various semi‐in‐situ characterizations. It is found that Cs + can migrate along the perovskite lattice and uniformly distribute in the vertical direction of the final perovskite film even changing the deposition order of CsBr and PbI 2 in the solid source, whereas this order can significantly affect the growth kinetics and the bandgap of the perovskite. Depositing CsBr before PbI 2 results in a faster conversion of inorganic precursors to perovskite phase, yielding a wider bandgap perovskite. Finally, we fabricated semi‐transparent perovskite cells using all‐vapor deposition process, which showed a champion efficiency of 18.7% and it retained ≈94% of its initial performance after 200 h of continuous operation. Moreover, using this all‐vapor deposition process, we achieved a champion efficiency of 26.9% for monolithic perovskite‐silicon tandem solar cells.
Förderung
- National Natural Science Foundation of China
- Shanxi Provincial Key Research and Development Project
Zitieren
APA
Zhang, Y., Zhu, Y., Sun, J., Hu, M., Chen, J., Duan, B., Hu, S., Hou, P., Tan, W. L., Ku, Z., Yang, W., & Lu, J. (2025). Low Pressure Chemical Vapor Deposited Perovskite Enables all Vacuum‐Processed Monolithic Perovskite‐Silicon Tandem Solar Cells. Advanced Energy Materials, 15(27). https://doi.org/10.1002/aenm.202405377
Vancouver
Zhang Y, Zhu Y, Sun J, Hu M, Chen J, Duan B, et al. Low Pressure Chemical Vapor Deposited Perovskite Enables all Vacuum‐Processed Monolithic Perovskite‐Silicon Tandem Solar Cells. Advanced Energy Materials. 2025;15(27). doi:10.1002/aenm.202405377
BibTeX
@article{Zhang2025,
author = {Zhang, Yuxi and Zhu, Yanqing and Sun, Jingsong and Hu, Min and Chen, Jiahui and Duan, Bingxin and Hu, Shenghan and Hou, Peiran and Tan, Wen Liang and Ku, Zhiliang and Yang, Weiguang and Lu, Jianfeng},
title = {Low Pressure Chemical Vapor Deposited Perovskite Enables all Vacuum‐Processed Monolithic Perovskite‐Silicon Tandem Solar Cells},
journal = {Advanced Energy Materials},
year = {2025},
volume = {15},
number = {27},
doi = {10.1002/aenm.202405377}
}
EUVIMED