EUVIMEDOdkrijte EUVIMED
Crossref

Continuous Hyaluronic Acid Supply by a UHMWPE/PEEK Interlocking Scaffold for Metatarsophalangeal Joint Prosthesis Lubricating Applications

Shenglin Li, Luyao Tang, Jian Pu, Jiali Wang iD, Congze Fan, Zeng Li, Jian Song iD

ACS Applied Materials & Interfaces · 2025

DOI: 10.1021/acsami.4c19390 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, 2025. Written by Shenglin Li and 6 co-authors. Institution: School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, Shenzhen 518107, P.R. China. Major MEDLINE topics: Hyaluronic Acid, Polyethylenes, Metatarsophalangeal Joint, Joint Prosthesis. Cited 5 times so far (Crossref); 59 references. Funded by: Basic and Applied Basic Research Foundation of Guangdong Province, Guangzhou Municipal Science and Technology Program key projects, Shenzhen Science and Technology Innovation Program.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Wear is one of the main causes of prothesis failure in hemiarthroplasty of small joints such as the metatarsophalangeal joint, to which lubrication improvement is a promising solution. Inspired by the natural joint structure and lubrication mechanisms, we developed a novel composite strategy for metatarsophalangeal joint hemiarthroplasty. An ultrahigh-molecular-weight polyethylene (UHMWPE) lubrication layer is interlocked within a 3D-printed poly(ether ether ketone) (PEEK) scaffold, and hyaluronic acid (HA) is introduced for hydrophilic modification of the UHMWPE matrix. HA encapsulated in the matrix can consistently emerge to the friction interface and firmly form a boundary lubrication layer, consequently enhancing the lubrication of the UHMWPE component. The friction coefficient of the scaffolds could be as low as 0.041 under a joint-equivalent load and a low friction velocity. Besides, the tested samples demonstrate good in vitro and in vivo biocompatibility. The bone tissues around the implantation site can heal normally and achieve implant fixation within 6 weeks. Summarily, in this work, inspired by the natural "cartilage-and-subchondral bone" structure, a continuous HA supply was attained in a UHMWPE/PEEK interlocking scaffold. Such a composite shall provide an excellent combination of tribological properties and biocompatibility, thus hopefully being a candidate material for the next-generation hemi-implants for metatarsophalangeal arthroplasty.

Subjects

MeSH terms (MEDLINE)

Hyaluronic AcidPolyethylenesMetatarsophalangeal JointJoint ProsthesisKetonesPolyethylene GlycolsTissue ScaffoldsBenzophenonesAnimalsPolymersLubricationHumansBiocompatible MaterialsFrictionMaterials Testing

Author keywords

PEEK/UHMWPE scaffoldbiomedical engineeringhyaluronic acid (HA)lubricatingmetatarsophalangeal joint

Substances

Hyaluronic Acidultra-high molecular weight polyethylenePolyethylenespolyetheretherketoneBenzophenonesKetonesPolyethylene GlycolsPolymersBiocompatible Materials

Authors and institutions

  • School of Biomedical Engineering, Shenzhen Campus of Sun Yat-sen University, Shenzhen 518107, P.R. China.
  • College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, P.R. China.
  • Department of Orthopedics, Guangdong Provincial People's Hospital (Guangdong Academy of Medical Sciences), Southern Medical University, Guangzhou 510080, P.R. China.

ORCID profiles: Jiali Wang, Jian Song

Funding

  • Basic and Applied Basic Research Foundation of Guangdong Province
  • Guangzhou Municipal Science and Technology Program key projects
  • Shenzhen Science and Technology Innovation Program

Cite

APA

Li, S., Tang, L., Pu, J., Wang, J., Fan, C., Li, Z., & Song, J. (2025). Continuous Hyaluronic Acid Supply by a UHMWPE/PEEK Interlocking Scaffold for Metatarsophalangeal Joint Prosthesis Lubricating Applications. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.4c19390

Vancouver

Li S, Tang L, Pu J, Wang J, Fan C, Li Z, et al. Continuous Hyaluronic Acid Supply by a UHMWPE/PEEK Interlocking Scaffold for Metatarsophalangeal Joint Prosthesis Lubricating Applications. ACS Applied Materials & Interfaces. 2025. doi:10.1021/acsami.4c19390

BibTeX
@article{Li2025,
  author = {Li, Shenglin and Tang, Luyao and Pu, Jian and Wang, Jiali and Fan, Congze and Li, Zeng and Song, Jian},
  title = {Continuous Hyaluronic Acid Supply by a UHMWPE/PEEK Interlocking Scaffold for Metatarsophalangeal Joint Prosthesis Lubricating Applications},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  doi = {10.1021/acsami.4c19390}
}
Start for free →