Wear Rate, Particle Morphology, and Biocompatibility of Polyether‐Ether‐Ketone Femoral Heads Against Highly Cross‐Linked Polyethylene Acetabular Cups in Hip Prosthetic Couples
Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2026
DOI: 10.1002/jbm.b.70139 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2026. Verfasst von Fei Hu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Bone and Joint Surgery, Renji Hospital, School of Medicine, Shanghai Jiao Tong University, Shanghai, China. Hauptthemen laut MEDLINE: Hip Prosthesis, Polyethylene Glycols, Ketones, Materials Testing. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
Biological reactions to wear particles from artificial joint prostheses can lead to osteolysis, ultimately resulting in aseptic loosening and implant failure, which affect the longevity of the prosthesis and the patient's quality of life. Polyether‐ether‐ketone (PEEK) has emerged as a key area of research in orthopedic implant materials due to its excellent wear resistance and biomechanical compatibility with human bone tissue. In this study, we conducted a 10‐million‐cycle simulator wear test on hip artificial joints with polyetheretherketone‐on‐highly cross‐linked polyethylene (PEEK‐on‐HCLPE) bearing couplings for the first time. The results indicated the total wear loss of the highly cross‐linked polyethylene (HCLPE) liners was 34.03 ± 3.2 mg (~2.96 mg/MC or 3.18 mm 3 /MC after linear fitting). The physicochemical properties of the mixed particles indicated a predominant particle size distribution ranging from 0.1 to 0.5 μm. Pure PEEK or HCLPE particles with the similar size range (maximum size: 0.5 μm) were generated by an EXAKT grinding system, followed by vacuum filtration with precision pore—size membranes for the biocompatibility experiments. In vitro immunological assays showed that 0.1 to 0.5 μm PEEK particles may induce a relatively weaker immune inflammatory effect than 0.1 to 0.5 μm HCLPE particles. In conclusion, the PEEK‐on‐HCLPE bearing couple has been demonstrated to have acceptable biosafety and a wear rate suitable for use as a potential hip replacement implant.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Bone and Joint Surgery, Renji Hospital, School of Medicine, Shanghai Jiao Tong University, Shanghai, China.
- School of Materials Science and Physics, China University of Mining and Technology, Xuzhou, China.
- Suzhou SinoMed Biomaterials Co., Ltd, Suzhou, Jiangsu, China.
- Orthotek Lab, School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, China.
ORCID-Profile: Zhuocheng Lyu, Xu Zheng, You Wang
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Hu, F., Zhang, X., Wu, X., Lyu, Z., Zheng, X., Yang, L., Hua, Z., Zhang, D., & Wang, Y. (2026). Wear Rate, Particle Morphology, and Biocompatibility of Polyether‐Ether‐Ketone Femoral Heads Against Highly Cross‐Linked Polyethylene Acetabular Cups in Hip Prosthetic Couples. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.70139
Vancouver
Hu F, Zhang X, Wu X, Lyu Z, Zheng X, Yang L, et al. Wear Rate, Particle Morphology, and Biocompatibility of Polyether‐Ether‐Ketone Femoral Heads Against Highly Cross‐Linked Polyethylene Acetabular Cups in Hip Prosthetic Couples. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2026. doi:10.1002/jbm.b.70139
BibTeX
@article{Hu2026,
author = {Hu, Fei and Zhang, Xinyue and Wu, Xiaobo and Lyu, Zhuocheng and Zheng, Xu and Yang, Linjun and Hua, Zikai and Zhang, Dekun and Wang, You},
title = {Wear Rate, Particle Morphology, and Biocompatibility of Polyether‐Ether‐Ketone Femoral Heads Against Highly Cross‐Linked Polyethylene Acetabular Cups in Hip Prosthetic Couples},
journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
year = {2026},
doi = {10.1002/jbm.b.70139}
}
EUVIMED