Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells
ACS Applied Materials & Interfaces · 2024-10-09 · 16 (40) · 53652-53664
DOI: 10.1021/acsami.4c07968 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2024-09-26. Written by Or Rahumi and 4 co-authors. Institution: Department of Chemical Engineering, Ariel University, Ariel 40700, Israel. Cited 43 times so far (Crossref); 70 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministry of Innovation, Science and Technology, Ministry of Energy and Infrastructure of Israel.
Abstract (original language)
Ammonia has emerged as a promising fuel for solid oxide fuel cells (SOFCs) owing to its high energy density, high hydrogen content, and carbon-free nature. Herein, the electrocatalytic potential of a novel Ni-doped SFM double-perovskite (Sr1.9Fe0.4Ni0.1Mo0.5O6-δ) is studied, for the first time, as an alternative anode material for symmetrical direct-ammonia SOFCs. Scanning and transmission electron microscopy characterization has revealed the exsolution of Ni-Fe nanoparticles (NPs) from the parent Sr2Fe1.5Mo0.5O6 under anode conditions, and X-ray diffraction has identified the FeNi3 phase after exposure to ammonia at 800 °C. The active-exsolved NPs contribute to achieving a maximal ammonia conversion rate of 97.9% within the cell's operating temperatures (550-800 °C). Utilizing 3D-printed symmetrical cells with SFNM-GDC electrodes, the study demonstrates comparable polarization resistances and peak power densities of 430 and 416 mW cm-2 for H2 and NH3 fuels, respectively, with long-term stability and a negligible voltage loss of 0.48% per 100 h during ammonia-fed extended galvanostatic operation. Finally, the ammonia consumption mechanism is elucidated as a multistep process involving ammonia decomposition, followed by hydrogen oxidation. This study provides a promising avenue for improving the performance and stability of ammonia-based SOFCs for potential applications in clean energy conversion technologies.
Subjects
Author keywords
Authors and institutions
- Department of Chemical Engineering, Ariel University, Ariel 40700, Israel.
- Elcogen AS, 23 Valukoja, 11415 Tallinn, Estonia.
- Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva 84105, Israel.
ORCID profiles: Or Rahumi, Manasa Kumar Rath, Ilia Rozenblium, Konstantin Borodianskiy
Funding
- Ministry of Innovation, Science and Technology
- Ministry of Energy and Infrastructure of Israel
Cite
APA
Rahumi, O., Rath, M. K., Meshi, L., Rozenblium, I., & Borodianskiy, K. (2024). Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells. ACS Applied Materials & Interfaces, 16(40), 53652-53664. https://doi.org/10.1021/acsami.4c07968
Vancouver
Rahumi O, Rath MK, Meshi L, Rozenblium I, Borodianskiy K. Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells. ACS Applied Materials & Interfaces. 2024;16(40):53652-53664. doi:10.1021/acsami.4c07968
BibTeX
@article{Rahumi2024,
author = {Rahumi, Or and Rath, Manasa Kumar and Meshi, Louisa and Rozenblium, Ilia and Borodianskiy, Konstantin},
title = {Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {40},
pages = {53652--53664},
doi = {10.1021/acsami.4c07968}
}
EUVIMED