EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells

Or Rahumi iD, Manasa Kumar Rath iD, Louisa Meshi, Ilia Rozenblium iD, Konstantin Borodianskiy iD

ACS Applied Materials & Interfaces · 2024-10-09 · 16 (40) · 53652-53664

DOI: 10.1021/acsami.4c07968 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-09-26. Written by Or Rahumi and 4 co-authors. Institution: Department of Chemical Engineering, Ariel University, Ariel 40700, Israel. Cited 43 times so far (Crossref); 70 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministry of Innovation, Science and Technology, Ministry of Energy and Infrastructure of Israel.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Ammonia has emerged as a promising fuel for solid oxide fuel cells (SOFCs) owing to its high energy density, high hydrogen content, and carbon-free nature. Herein, the electrocatalytic potential of a novel Ni-doped SFM double-perovskite (Sr1.9Fe0.4Ni0.1Mo0.5O6-δ) is studied, for the first time, as an alternative anode material for symmetrical direct-ammonia SOFCs. Scanning and transmission electron microscopy characterization has revealed the exsolution of Ni-Fe nanoparticles (NPs) from the parent Sr2Fe1.5Mo0.5O6 under anode conditions, and X-ray diffraction has identified the FeNi3 phase after exposure to ammonia at 800 °C. The active-exsolved NPs contribute to achieving a maximal ammonia conversion rate of 97.9% within the cell's operating temperatures (550-800 °C). Utilizing 3D-printed symmetrical cells with SFNM-GDC electrodes, the study demonstrates comparable polarization resistances and peak power densities of 430 and 416 mW cm-2 for H2 and NH3 fuels, respectively, with long-term stability and a negligible voltage loss of 0.48% per 100 h during ammonia-fed extended galvanostatic operation. Finally, the ammonia consumption mechanism is elucidated as a multistep process involving ammonia decomposition, followed by hydrogen oxidation. This study provides a promising avenue for improving the performance and stability of ammonia-based SOFCs for potential applications in clean energy conversion technologies.

Subjects

Author keywords

FeNi3 nanocatalystdirect ink writingdirect-ammonia-fed cellelectrocatalysisexsolutionsolid oxide fuel cell

Authors and institutions

  • Department of Chemical Engineering, Ariel University, Ariel 40700, Israel.
  • Elcogen AS, 23 Valukoja, 11415 Tallinn, Estonia.
  • Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva 84105, Israel.

ORCID profiles: Or Rahumi, Manasa Kumar Rath, Ilia Rozenblium, Konstantin Borodianskiy

Funding

  • Ministry of Innovation, Science and Technology
  • Ministry of Energy and Infrastructure of Israel

Cite

APA

Rahumi, O., Rath, M. K., Meshi, L., Rozenblium, I., & Borodianskiy, K. (2024). Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells. ACS Applied Materials & Interfaces, 16(40), 53652-53664. https://doi.org/10.1021/acsami.4c07968

Vancouver

Rahumi O, Rath MK, Meshi L, Rozenblium I, Borodianskiy K. Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells. ACS Applied Materials & Interfaces. 2024;16(40):53652-53664. doi:10.1021/acsami.4c07968

BibTeX
@article{Rahumi2024,
  author = {Rahumi, Or and Rath, Manasa Kumar and Meshi, Louisa and Rozenblium, Ilia and Borodianskiy, Konstantin},
  title = {Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {40},
  pages = {53652--53664},
  doi = {10.1021/acsami.4c07968}
}
Start for free →