Boosting Molecular Cross-Linking in a Phenolic Resin for Spherical Hard Carbon with Enriched Closed Pores toward Enhanced Sodium Storage Ability
ACS Applied Materials & Interfaces · 2024-05-29 · 16 (21) · 27419-27428
DOI: 10.1021/acsami.4c04101 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2024-05-14. Written by Liewen Guo and 11 co-authors. Institution: State Key Laboratory of Chemical Resources Engineering, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing Unive…. Cited 73 times so far (Crossref); 46 references. Funded by: National Natural Science Foundation of China, Taishan Industrial Experts Program.
Abstract (original language)
Phenolic resin (PF) is considered a promising precursor of hard carbon (HC) for advanced-performance anodes in sodium-ion batteries (SIBs) because of its facile designability and high residual carbon yield. However, understanding how the structure of PF precursors influences sodium storage in their derived HC remains a significant challenge. Herein, the microstructure of HC is controlled by the degree of cross-linking of resorcinol-benzaldehyde (RB) resin. We reveal that robust molecular cross-linking in RB resin induced by hydrothermal treatment promotes closed-pore formation in the derived HC. The mechanism is devised for the decomposition of a highly cross-linked RB three-dimensional network into randomly stacked short-range graphitic microcrystals during high-temperature carbonization, contributing to the abundant closed pores in the derived HC. In addition, the high cross-linking degree of RB resin endows its derived HC with a small-sized spherical morphology and large interlayer spacing, which improves the rate performance of HC. Consequently, the optimized hydrothermal treatment HC anode shows a higher specific capacity of 372.7 mAh g-1 and better rate performance than the HC anode without hydrothermal treatment (276.0 mAh g-1). This strategy can provide feasible molecular cross-linking engineering for the development of closed pores in PF-based HC toward enhanced sodium storage.
Subjects
Author keywords
Authors and institutions
- State Key Laboratory of Chemical Resources Engineering, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, PR China.
- National Engineering Research Center of Coal Gasification and Coal-Based Advanced Materials, Shandong Energy Group Co., Ltd., Jinan 250100, PR China.
ORCID profiles: Liewen Guo, Xiaohong Chen, Huaihe Song
Funding
- National Natural Science Foundation of China
- Taishan Industrial Experts Program
Cite
APA
Guo, L., Qiu, C., Yuan, R., Li, X., Li, X., Li, K., Zhu, W., Liu, X., Li, A., Liu, H., Chen, X., & Song, H. (2024). Boosting Molecular Cross-Linking in a Phenolic Resin for Spherical Hard Carbon with Enriched Closed Pores toward Enhanced Sodium Storage Ability. ACS Applied Materials & Interfaces, 16(21), 27419-27428. https://doi.org/10.1021/acsami.4c04101
Vancouver
Guo L, Qiu C, Yuan R, Li X, Li X, Li K, et al. Boosting Molecular Cross-Linking in a Phenolic Resin for Spherical Hard Carbon with Enriched Closed Pores toward Enhanced Sodium Storage Ability. ACS Applied Materials & Interfaces. 2024;16(21):27419-27428. doi:10.1021/acsami.4c04101
BibTeX
@article{Guo2024,
author = {Guo, Liewen and Qiu, Chuang and Yuan, Renlu and Li, Xiaotian and Li, Xin and Li, Kairan and Zhu, Wanxiong and Liu, Xuewei and Li, Ang and Liu, Haiyan and Chen, Xiaohong and Song, Huaihe},
title = {Boosting Molecular Cross-Linking in a Phenolic Resin for Spherical Hard Carbon with Enriched Closed Pores toward Enhanced Sodium Storage Ability},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {21},
pages = {27419--27428},
doi = {10.1021/acsami.4c04101}
}
EUVIMED