EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteries

Ran Xu, Ning Sun, Huanyu Zhou, Xiaqing Chang, Razium A. Soomro, Bin Xu

Battery Energy · 2023-03 · 2 (2)

DOI: 10.1002/bte2.20220054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Battery Energy, online erschienen am 28.12.2022. Verfasst von Ran Xu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 104-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Beijing Municipal Science and Technology Commission, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hard carbons are widely studied as anode materials for sodium‐ion batteries (SIBs) due to their high Na‐storage capacity, long cycle life, and low cost. However, the low initial coulombic efficiency (ICE) and poor cycle performance remain bottleneck concerns that necessitate a comprehensive material engineering solution. Herein, we propose a facile strategy to synthesize amorphous carbons with pseudo‐graphitic dominated crystalline, expanded interlayer spacing, and reduced surface defects via carbonization of the cross‐linking network of phenolic resin and sucrose. An elaborate structural and electrochemical characteristics analysis has been investigated against different sucrose contents and carbonization temperatures. The representative PF‐S‐55‐1200 with the optimum cross‐linking degree as well as carbonization temperature realizes a high reversible Na‐storage capacity of 323.0 mAh g −1 with an ICE as high as 86.4%, much superior to the pristine phenolic resin pyrolytic carbon with a capacity of 267.1 mAh g −1 and an ICE of 46.3%. The hybrid hard carbons also exhibit robust structural stability with a prolonged cycle lifespan evidenced by a retained capacity of 238.3 mAh g −1 at a current density of 200 mA g −1 over 1500 cycles. The proposed route promises low‐cost and high‐performance hybrid hard carbons with optimized structural configuration for advanced SIBs.

Förderung

  • National Natural Science Foundation of China
  • Beijing Municipal Science and Technology Commission
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Xu, R., Sun, N., Zhou, H., Chang, X., Soomro, R. A., & Xu, B. (2023). Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteries. Battery Energy, 2(2). https://doi.org/10.1002/bte2.20220054

Vancouver

Xu R, Sun N, Zhou H, Chang X, Soomro RA, Xu B. Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteries. Battery Energy. 2023;2(2). doi:10.1002/bte2.20220054

BibTeX
@article{Xu2023,
  author = {Xu, Ran and Sun, Ning and Zhou, Huanyu and Chang, Xiaqing and Soomro, Razium A. and Xu, Bin},
  title = {Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteries},
  journal = {Battery Energy},
  year = {2023},
  volume = {2},
  number = {2},
  doi = {10.1002/bte2.20220054}
}
Kostenlos starten →