EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP

Piotr Mocny iD, Ting-Chih Lin, Rohan Parekh iD, Yuqi Zhao iD, Marek Czarnota iD, Mateusz Urbańczyk iD, Carmel Majidi iD, Krzysztof Matyjaszewski iD

ACS Applied Materials & Interfaces · 2024-04-23

DOI: 10.1021/acsami.4c03369 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-04-23. Written by Piotr Mocny and 7 co-authors. Institution: Department of Chemistry, Carnegie Mellon University, 4400 Fifth Ave., Pittsburgh, Pennsylvania 15213, United States. Cited 3 times so far (Crossref); 87 references. The full text is freely available (open access, CC BY 4.0). Funded by: Division of Chemistry, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, Narodowe Centrum Nauki.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

Poly(vinylidene fluoride) (PVDF) shows excellent chemical and thermal resistance and displays high dielectric strength and unique piezoelectricity, which are enabling for applications in membranes, electric insulators, sensors, or power generators. However, its low polarity and lack of functional groups limit wider applications. While inert, PVDF has been modified by grafting polymer chains by atom transfer radical polymerization (ATRP), albeit via an unclear mechanism, given the strong C-F bonds. Herein, we applied eosin Y and green-light-mediated ATRP to modify PVDF-based materials. The method gave nearly quantitative (meth)acrylate monomer conversions within 2 h without deoxygenation and without the formation of unattached homopolymers, as confirmed by control experiments and DOSY NMR measurements. The gamma distribution model that accounts for broadly dispersed polymers in DOSY experiments was essential and serves as a powerful tool for the analysis of PVDF. The NMR analysis of poly(methyl acrylate) graft chain-ends on PVDF-CTFE (statistical copolymer with chlorotrifluoroethylene) was carried out successfully for the first time and showed up to 23 grafts per PVDF-CTFE chain. The grafting density was tunable depending on the solvent composition and light intensity during the grafting. The initiation proceeded either from the C-Cl sites of PVDF-CTFE or via unsaturations in the PVDF backbones. The dehydrofluorinated PVDF was 20 times more active than saturated PVDF during the grafting. The method was successfully applied to modify PVDF, PVDF-HFP, and Viton A401C. The obtained PVDF-CTFE-g-PnBMA materials were investigated in more detail. They featured slightly lower crystallinity than PVDF-CTFE (12-18 vs 24.3%) and had greatly improved mechanical performance: Young's moduli of up to 488 MPa, ductility of 316%, and toughness of 46 × 106 J/m3.

Subjects

Author keywords

ATRPDOSY NMRfluoropolymersgraftingphotopolymerizationpoly(vinylidene fluoride)stretchabilitytoughness

Authors and institutions

  • Department of Chemistry, Carnegie Mellon University, 4400 Fifth Ave., Pittsburgh, Pennsylvania 15213, United States.
  • Faculty of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw, Poland.
  • Department of Materials Science & Engineering, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, Pennsylvania 15213, United States.
  • Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland.
  • Department of Mechanical Engineering, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, Pennsylvania 15213, United States.

ORCID profiles: Piotr Mocny, Rohan Parekh, Yuqi Zhao, Marek Czarnota, Mateusz Urbańczyk, Carmel Majidi, Krzysztof Matyjaszewski

Funding

  • Division of Chemistry
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • Narodowe Centrum Nauki

Cite

APA

Mocny, P., Lin, T. C., Parekh, R., Zhao, Y., Czarnota, M., Urbańczyk, M., Majidi, C., & Matyjaszewski, K. (2024). Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.4c03369

Vancouver

Mocny P, Lin TC, Parekh R, Zhao Y, Czarnota M, Urbańczyk M, et al. Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP. ACS Applied Materials & Interfaces. 2024. doi:10.1021/acsami.4c03369

BibTeX
@article{Mocny2024,
  author = {Mocny, Piotr and Lin, Ting-Chih and Parekh, Rohan and Zhao, Yuqi and Czarnota, Marek and Urbańczyk, Mateusz and Majidi, Carmel and Matyjaszewski, Krzysztof},
  title = {Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  doi = {10.1021/acsami.4c03369}
}
Start for free →