EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP

Piotr Mocny iD, Ting-Chih Lin, Rohan Parekh iD, Yuqi Zhao iD, Marek Czarnota iD, Mateusz Urbańczyk iD, Carmel Majidi iD, Krzysztof Matyjaszewski iD

ACS Applied Materials & Interfaces · 23.04.2024

DOI: 10.1021/acsami.4c03369 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 23.04.2024. Verfasst von Piotr Mocny und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Carnegie Mellon University, 4400 Fifth Ave., Pittsburgh, Pennsylvania 15213, United States. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Division of Chemistry, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, Narodowe Centrum Nauki.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(vinylidene fluoride) (PVDF) shows excellent chemical and thermal resistance and displays high dielectric strength and unique piezoelectricity, which are enabling for applications in membranes, electric insulators, sensors, or power generators. However, its low polarity and lack of functional groups limit wider applications. While inert, PVDF has been modified by grafting polymer chains by atom transfer radical polymerization (ATRP), albeit via an unclear mechanism, given the strong C-F bonds. Herein, we applied eosin Y and green-light-mediated ATRP to modify PVDF-based materials. The method gave nearly quantitative (meth)acrylate monomer conversions within 2 h without deoxygenation and without the formation of unattached homopolymers, as confirmed by control experiments and DOSY NMR measurements. The gamma distribution model that accounts for broadly dispersed polymers in DOSY experiments was essential and serves as a powerful tool for the analysis of PVDF. The NMR analysis of poly(methyl acrylate) graft chain-ends on PVDF-CTFE (statistical copolymer with chlorotrifluoroethylene) was carried out successfully for the first time and showed up to 23 grafts per PVDF-CTFE chain. The grafting density was tunable depending on the solvent composition and light intensity during the grafting. The initiation proceeded either from the C-Cl sites of PVDF-CTFE or via unsaturations in the PVDF backbones. The dehydrofluorinated PVDF was 20 times more active than saturated PVDF during the grafting. The method was successfully applied to modify PVDF, PVDF-HFP, and Viton A401C. The obtained PVDF-CTFE-g-PnBMA materials were investigated in more detail. They featured slightly lower crystallinity than PVDF-CTFE (12-18 vs 24.3%) and had greatly improved mechanical performance: Young's moduli of up to 488 MPa, ductility of 316%, and toughness of 46 × 106 J/m3.

Schlagwörter

Stichwörter der Autor:innen

ATRPDOSY NMRfluoropolymersgraftingphotopolymerizationpoly(vinylidene fluoride)stretchabilitytoughness

Autor:innen und Institutionen

  • Department of Chemistry, Carnegie Mellon University, 4400 Fifth Ave., Pittsburgh, Pennsylvania 15213, United States.
  • Faculty of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw, Poland.
  • Department of Materials Science & Engineering, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, Pennsylvania 15213, United States.
  • Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland.
  • Department of Mechanical Engineering, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, Pennsylvania 15213, United States.

ORCID-Profile: Piotr Mocny, Rohan Parekh, Yuqi Zhao, Marek Czarnota, Mateusz Urbańczyk, Carmel Majidi, Krzysztof Matyjaszewski

Förderung

  • Division of Chemistry
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • Narodowe Centrum Nauki

Zitieren

APA

Mocny, P., Lin, T. C., Parekh, R., Zhao, Y., Czarnota, M., Urbańczyk, M., Majidi, C., & Matyjaszewski, K. (2024). Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.4c03369

Vancouver

Mocny P, Lin TC, Parekh R, Zhao Y, Czarnota M, Urbańczyk M, et al. Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP. ACS Applied Materials & Interfaces. 2024. doi:10.1021/acsami.4c03369

BibTeX
@article{Mocny2024,
  author = {Mocny, Piotr and Lin, Ting-Chih and Parekh, Rohan and Zhao, Yuqi and Czarnota, Marek and Urbańczyk, Mateusz and Majidi, Carmel and Matyjaszewski, Krzysztof},
  title = {Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  doi = {10.1021/acsami.4c03369}
}
Kostenlos starten →