One-Step Microfluidic Fabrication of Bioinspired Microfibers with a Spindle-Knot Structure for Fog Harvest
ACS Applied Materials & Interfaces · 2024-03-20 · 16 (11) · 13756-13762
DOI: 10.1021/acsami.3c19004 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2024-03-11. Written by Tianbo Yang and 4 co-authors. Institution: Zhejiang Provincial Key Laboratory of Flow Measurement Technology, China Jiliang University, Hangzhou, Zhejiang 310018, People's Republic of China. Cited 16 times so far (Crossref); 39 references. Funded by: Natural Science Foundation of Heilongjiang Province, National Natural Science Foundation of China, China Administration for Market Regulation science and technology project.
Abstract (original language)
Many biomimetic microfibers have been designed from spider silk to collect water efficiently from humid air as a result of its periodic spindle-knot structure, which enhances the direct movement and convergence of captured fog droplets. Here, a hydrodynamic flow-focusing microfluidic device with a theta-shaped tube is designed for the one-step fabrication of bioinspired microfibers with a spindle-knot structure for fog harvest. The morphology of the structured microfibers, including height, width, and spacing of spindle knots, can be adjusted readily by regulating the flow rate of specific phases. The production rate of these structured microfibers can reach 1100 cm/min. Moreover, the capture, transportation, and collection performance of fog droplets on various microfibers are investigated in a fog collection platform. It is demonstrated that our one-step microfluidic device presents a ready method for the fabrication of structured microfibers with spindle knots, which provide a significant facilitation on efficient fog capture and water collection.
Subjects
Author keywords
Authors and institutions
- Zhejiang Provincial Key Laboratory of Flow Measurement Technology, China Jiliang University, Hangzhou, Zhejiang 310018, People's Republic of China.
- School of Mechatronics Engineering, Harbin Institute of Technology (HIT), Harbin, Heilongjiang 150001, People's Republic of China.
ORCID profiles: Likai Hou
Funding
- Natural Science Foundation of Heilongjiang Province
- National Natural Science Foundation of China
- China Administration for Market Regulation science and technology project
Cite
APA
Yang, T., Hou, L., Fan, X., Yan, H., & Bao, F. (2024). One-Step Microfluidic Fabrication of Bioinspired Microfibers with a Spindle-Knot Structure for Fog Harvest. ACS Applied Materials & Interfaces, 16(11), 13756-13762. https://doi.org/10.1021/acsami.3c19004
Vancouver
Yang T, Hou L, Fan X, Yan H, Bao F. One-Step Microfluidic Fabrication of Bioinspired Microfibers with a Spindle-Knot Structure for Fog Harvest. ACS Applied Materials & Interfaces. 2024;16(11):13756-13762. doi:10.1021/acsami.3c19004
BibTeX
@article{Yang2024,
author = {Yang, Tianbo and Hou, Likai and Fan, Xu and Yan, Hui and Bao, Fubing},
title = {One-Step Microfluidic Fabrication of Bioinspired Microfibers with a Spindle-Knot Structure for Fog Harvest},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {11},
pages = {13756--13762},
doi = {10.1021/acsami.3c19004}
}
EUVIMED