EUVIMEDEUVIMED entdecken
Crossref

Bioinspired Photothermic MOF-Spindle-Knot Microfibers with Ultrafast Uptake–Release for Atmospheric Freshwater Harvester

Lingmei Zhu, Hengyu Pan, Huijie Wei, Tiance Zhang, Boyang Tian, Jianhua Wang, Yongping Hou iD, Yongmei Zheng iD

ACS Applied Materials & Interfaces · 25.02.2026 · 18 (7) · 12007-12017

DOI: 10.1021/acsami.6c00388 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 13.02.2026. Verfasst von Lingmei Zhu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University (BUAA), Bei…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China (NSFC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A bioinspired photothermic MOF-spindle-knot microfiber (BPMM) is designed by using polyisopropylacrylamide, α-polyvinylidene fluoride as-grown metal-organic framework (MOF-303), and carbon black. A mechanism of water harvesting is related to the integrative effects of chemical and structural, i.e., BPMM composed of periodic-distributed MOF-spindle-knot with rough curvature gradient features, displaying the three-dimensional skeleton with porous channel and high-hydrophilic sites and photothermal responsive hydrophilic-hydrophobic switches as well, which runs a synergistic effect to achieve an ultrahigh water uptake-release and propel water-molecule capture in high efficiency under atmospheric low humidity. BPMM takes on ∼ 100% of water release under 1 sun for as-uptaked water and, accordingly, achieves the water harvesting capability of ∼0.16-0.62 g g-1 h-1 at ∼25 °C and ∼10-60% relative humidity (RH), which outperforms 2-8 times higher than that of normal MOF-303 or other fibers. BPMM maintains 72 cycles day-1, achieving water harvesting capability of ∼12.27 g g-1 in ∼10% RH, under 1 sun. As outdoor at ∼33.4 °C with ∼42.7% RH and ∼0.66 kW m-2, BPMM reaches water harvesting capability of ∼24.71 g g-1 day-1. This finding provides an insight into the design of supermaterials, which would be extended into some realms, e.g., water engineering, energy system, sensor devices in situations with water scarcity, etc.

Schlagwörter

Stichwörter der Autor:innen

MOFatmospheric water harvesterbioinspired spider silkhigh efficiencylow humidity

Autor:innen und Institutionen

  • Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University (BUAA), Beijing 100191, P. R. China.

ORCID-Profile: Yongping Hou, Yongmei Zheng

Förderung

  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Zhu, L., Pan, H., Wei, H., Zhang, T., Tian, B., Wang, J., Hou, Y., & Zheng, Y. (2026). Bioinspired Photothermic MOF-Spindle-Knot Microfibers with Ultrafast Uptake–Release for Atmospheric Freshwater Harvester. ACS Applied Materials & Interfaces, 18(7), 12007-12017. https://doi.org/10.1021/acsami.6c00388

Vancouver

Zhu L, Pan H, Wei H, Zhang T, Tian B, Wang J, et al. Bioinspired Photothermic MOF-Spindle-Knot Microfibers with Ultrafast Uptake–Release for Atmospheric Freshwater Harvester. ACS Applied Materials & Interfaces. 2026;18(7):12007-12017. doi:10.1021/acsami.6c00388

BibTeX
@article{Zhu2026,
  author = {Zhu, Lingmei and Pan, Hengyu and Wei, Huijie and Zhang, Tiance and Tian, Boyang and Wang, Jianhua and Hou, Yongping and Zheng, Yongmei},
  title = {Bioinspired Photothermic MOF-Spindle-Knot Microfibers with Ultrafast Uptake–Release for Atmospheric Freshwater Harvester},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {7},
  pages = {12007--12017},
  doi = {10.1021/acsami.6c00388}
}
Kostenlos starten →