EUVIMEDOpdag EUVIMED
Crossref

Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration

Disiya Davis, Swathi Krishna Narayanan, Arya Ajeev, Jayashree Nair, Jithin Jeeji, Ananthu Vijayan, Midhun Viyyur Kuttyadi, Arun Nelliparambil Sathian, Arul Kashmir Arulraj iD

ACS Applied Materials & Interfaces · 2023-05-31 · 15 (21) · 25734-25743

DOI: 10.1021/acsami.2c21712 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-04-19. Written by Disiya Davis and 8 co-authors. Institution: Centre for Materials for Electronics Technology (C-MET), Shornur Road, Athani, MG Kavu Post, Thrissur 680581, Kerala, India. Cited 32 times so far (Crossref); 69 references.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Paper-based lightweight, degradable, low-cost, and eco-friendly substrates are extensively used in wearable biosensor applications, albeit to a lesser extent in sensing acetone and other gas-phase analytes. Generally, rigid substrates with heaters have been employed to develop acetone sensors due to the high operating/recovery temperature (typically above 200 °C), limiting the use of papers as substrates in such sensing applications. In this work, we proposed fabricating the paper-based, room-temperature-operatable acetone sensor using ZnO-polyaniline-based acetone-sensing inks by a facile fabrication method. The fabricated paper-based electrodes showed good electrical conductivity (80 S/m) and mechanical stability (∼1000 bending cycles). The acetone sensors showed a sensitivity of 0.02/100 ppm and 0.6/10 μL with an ultrafast response (4 s) and recovery time (15 s) at room temperature. The sensors delivered a broad sensitivity over a physiological range of 260 to >1000 ppm with R2 > 0.98 under atmospheric conditions. Further, the role of the surface, interfacial, microstructure, electrical, and electromechanical properties of the paper-based sensor devices has been correlated with the sensitivity and room-temperature recovery observed in our system. These versatile, green, flexible electronic devices would be ideal for low-cost, highly regenerative, room-/low-temperature-operable wearable sensor applications.

Subjects

Author keywords

acetone sensorsconducting inksflexible electronicspaper electronicswearable sensors

Authors and institutions

  • Centre for Materials for Electronics Technology (C-MET), Shornur Road, Athani, MG Kavu Post, Thrissur 680581, Kerala, India.

ORCID profiles: Arul Kashmir Arulraj

Cite

APA

Davis, D., Narayanan, S. K., Ajeev, A., Nair, J., Jeeji, J., Vijayan, A., Viyyur Kuttyadi, M., Nelliparambil Sathian, A., & Arulraj, A. K. (2023). Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration. ACS Applied Materials & Interfaces, 15(21), 25734-25743. https://doi.org/10.1021/acsami.2c21712

Vancouver

Davis D, Narayanan SK, Ajeev A, Nair J, Jeeji J, Vijayan A, et al. Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration. ACS Applied Materials & Interfaces. 2023;15(21):25734-25743. doi:10.1021/acsami.2c21712

BibTeX
@article{Davis2023,
  author = {Davis, Disiya and Narayanan, Swathi Krishna and Ajeev, Arya and Nair, Jayashree and Jeeji, Jithin and Vijayan, Ananthu and Viyyur Kuttyadi, Midhun and Nelliparambil Sathian, Arun and Arulraj, Arul Kashmir},
  title = {Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {25734--25743},
  doi = {10.1021/acsami.2c21712}
}
Start for free →