EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Roll-to-roll manufacturing of flexible acetone sensors

Ya-Ching Yu, Nicholas Glassmaker, Ana M Ulloa, Benson Kunhung Tsai, Amit Barui, Haiyan Wang, Lia Stanciu iD

PLOS One · 03.11.2025 · 20 (11) · e0334947

DOI: 10.1371/journal.pone.0334947 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 03.11.2025. Verfasst von Ya-Ching Yu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Engineering, Purdue University, West Lafayette, Indiana, United States of America. Hauptthemen laut MEDLINE: Acetone. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Directorate for Engineering, National Institute of Food and Agriculture.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A fully roll-to-roll (R2R) manufactured conductometric sensor has been developed for acetone detection. It features flexible, screen-printed silver electrodes modified with a MoS2 and single-walled carbon nanotube (SWCNT) nanocomposite. The electro-spraying process allowed for the simultaneous fabrication of over 100 electrodes. The optimized electro-sprayed electrodes showed a consistent average resistance of 99.63 Ω (SD = 8.10), ensuring uniform and reliable sensor performance for volatile organic compounds (VOCs) detection. SEM and TEM analyses revealed that the porous 3D MoS 2 -SWCNT network enhances gas adsorption and sensor performance. To improve acetone selectivity, electrodes were functionalized with tetrafluorohydroquinone (TFQ), which binds with acetone and facilitates charge transfer, reducing holes in p-type SWCNT and increasing resistance. Sensitivity was further optimized by adjusting film deposition parameters, with a thinner MoS 2 layer (~30 nm) improving the response to 20% acetone by 120%. Stability tests confirmed 90% signal retention after 30 days in nitrogen. This study proposed the first platform of a MoS 2 -SWCNT nanocomposite in R2R manufacturing for flexible acetone sensors. The approach provides a scalable solution, bridging lab-scale research with industrial production and advancing practical VOC detection applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AcetoneNanotubes, CarbonElectrodesVolatile Organic CompoundsMolybdenumNanocompositesDisulfidesElectrochemical Techniques

Substanzen

AcetoneNanotubes, CarbonVolatile Organic CompoundsMolybdenumDisulfidesmolybdenum disulfide

Autor:innen und Institutionen

  • School of Materials Engineering, Purdue University, West Lafayette, Indiana, United States of America.
  • Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana, United States of America.
  • School of Biomedical Engineering, Purdue University, West Lafayette, Indiana, United States of America.
  • Bindley Bioscience Center, Purdue University, West Lafayette, Indiana, United States of America.

ORCID-Profile: Lia Stanciu

Förderung

  • Directorate for Engineering
  • National Institute of Food and Agriculture

Zitieren

APA

Yu, Y. C., Glassmaker, N., Ulloa, A. M., Tsai, B. K., Barui, A., Wang, H., & Stanciu, L. (2025). Roll-to-roll manufacturing of flexible acetone sensors. PLOS One, 20(11), e0334947. https://doi.org/10.1371/journal.pone.0334947

Vancouver

Yu YC, Glassmaker N, Ulloa AM, Tsai BK, Barui A, Wang H, et al. Roll-to-roll manufacturing of flexible acetone sensors. PLOS One. 2025;20(11):e0334947. doi:10.1371/journal.pone.0334947

BibTeX
@article{Yu2025,
  author = {Yu, Ya-Ching and Glassmaker, Nicholas and Ulloa, Ana M and Tsai, Benson Kunhung and Barui, Amit and Wang, Haiyan and Stanciu, Lia},
  title = {Roll-to-roll manufacturing of flexible acetone sensors},
  journal = {PLOS One},
  year = {2025},
  volume = {20},
  number = {11},
  pages = {e0334947},
  doi = {10.1371/journal.pone.0334947}
}
Kostenlos starten →