EUVIMEDEUVIMED entdecken
Crossref

Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration

Disiya Davis, Swathi Krishna Narayanan, Arya Ajeev, Jayashree Nair, Jithin Jeeji, Ananthu Vijayan, Midhun Viyyur Kuttyadi, Arun Nelliparambil Sathian, Arul Kashmir Arulraj iD

ACS Applied Materials & Interfaces · 31.05.2023 · 15 (21) · 25734-25743

DOI: 10.1021/acsami.2c21712 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 19.04.2023. Verfasst von Disiya Davis und 8 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Materials for Electronics Technology (C-MET), Shornur Road, Athani, MG Kavu Post, Thrissur 680581, Kerala, India. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 69 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Paper-based lightweight, degradable, low-cost, and eco-friendly substrates are extensively used in wearable biosensor applications, albeit to a lesser extent in sensing acetone and other gas-phase analytes. Generally, rigid substrates with heaters have been employed to develop acetone sensors due to the high operating/recovery temperature (typically above 200 °C), limiting the use of papers as substrates in such sensing applications. In this work, we proposed fabricating the paper-based, room-temperature-operatable acetone sensor using ZnO-polyaniline-based acetone-sensing inks by a facile fabrication method. The fabricated paper-based electrodes showed good electrical conductivity (80 S/m) and mechanical stability (∼1000 bending cycles). The acetone sensors showed a sensitivity of 0.02/100 ppm and 0.6/10 μL with an ultrafast response (4 s) and recovery time (15 s) at room temperature. The sensors delivered a broad sensitivity over a physiological range of 260 to >1000 ppm with R2 > 0.98 under atmospheric conditions. Further, the role of the surface, interfacial, microstructure, electrical, and electromechanical properties of the paper-based sensor devices has been correlated with the sensitivity and room-temperature recovery observed in our system. These versatile, green, flexible electronic devices would be ideal for low-cost, highly regenerative, room-/low-temperature-operable wearable sensor applications.

Schlagwörter

Stichwörter der Autor:innen

acetone sensorsconducting inksflexible electronicspaper electronicswearable sensors

Autor:innen und Institutionen

  • Centre for Materials for Electronics Technology (C-MET), Shornur Road, Athani, MG Kavu Post, Thrissur 680581, Kerala, India.

ORCID-Profile: Arul Kashmir Arulraj

Zitieren

APA

Davis, D., Narayanan, S. K., Ajeev, A., Nair, J., Jeeji, J., Vijayan, A., Viyyur Kuttyadi, M., Nelliparambil Sathian, A., & Arulraj, A. K. (2023). Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration. ACS Applied Materials & Interfaces, 15(21), 25734-25743. https://doi.org/10.1021/acsami.2c21712

Vancouver

Davis D, Narayanan SK, Ajeev A, Nair J, Jeeji J, Vijayan A, et al. Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration. ACS Applied Materials & Interfaces. 2023;15(21):25734-25743. doi:10.1021/acsami.2c21712

BibTeX
@article{Davis2023,
  author = {Davis, Disiya and Narayanan, Swathi Krishna and Ajeev, Arya and Nair, Jayashree and Jeeji, Jithin and Vijayan, Ananthu and Viyyur Kuttyadi, Midhun and Nelliparambil Sathian, Arun and Arulraj, Arul Kashmir},
  title = {Flexible Paper-Based Room-Temperature Acetone Sensors with Ultrafast Regeneration},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {25734--25743},
  doi = {10.1021/acsami.2c21712}
}
Kostenlos starten →