EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode

Steffen Weinmann, Julia Schäfer, Marina Reis, Nabi Isaev, Jennifer L.M. Rupp, Kun Joong Kim

ACS Applied Energy Materials · 2026-08-10 · 9 (15) · 9790-9798

DOI: 10.1021/acsaem.6c01097 ↗

At a glance

Journal article in ACS Applied Energy Materials, published online on 2026-07-24. Written by Steffen Weinmann and 5 co-authors. 35 references. The full text is freely available (open access, CC BY 4.0). Funded by: Bundesministerium für Forschung, Technologie und Raumfahrt.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Precise control of densification behavior and co-sintering compatibility is essential for the scalable fabrication and integration of oxide-based solid-state batteries. Here, the influence of sintering additives on the densification kinetics, phase evolution, microstructure, and ionic conductivity of Li7La3Zr2O12 (LLZO) electrolytes is systematically investigated, while their effect on densification and shrinkage behavior with LiCoO2-LLZO composite cathodes is evaluated to assess co-sintering compatibility. Among the investigated additives in LLZO, MgO and Li2O enable relative densities exceeding 96% while preserving high ionic conductivity and suppressing electronic conductivity. Microstructural and dilatometric analyses reveal distinct additive-dependent sintering behaviors, demonstrating the critical role of additive chemistry in governing densification and microstructural evolution. Importantly, LiOH- and Li2O-MgO-modified systems reduce the shrinkage mismatch between composite cathode and electrolyte layers from ∼14% to ∼2.5–3.5% at 1050 °C, significantly improving shrinkage compatibility. These findings demonstrate that tailored sintering additive strategies enable shrinkage compatibility while preserving electrolyte performance, representing a key step toward realizing mechanically robust oxide-based solid-state batteries.

Funding

  • Bundesministerium für Forschung, Technologie und Raumfahrt

Cite

APA

Weinmann, S., Schäfer, J., Reis, M., Isaev, N., Rupp, J. L., & Kim, K. J. (2026). Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode. ACS Applied Energy Materials, 9(15), 9790-9798. https://doi.org/10.1021/acsaem.6c01097

Vancouver

Weinmann S, Schäfer J, Reis M, Isaev N, Rupp JL, Kim KJ. Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode. ACS Applied Energy Materials. 2026;9(15):9790-9798. doi:10.1021/acsaem.6c01097

BibTeX
@article{Weinmann2026,
  author = {Weinmann, Steffen and Schäfer, Julia and Reis, Marina and Isaev, Nabi and Rupp, Jennifer L.M. and Kim, Kun Joong},
  title = {Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  volume = {9},
  number = {15},
  pages = {9790--9798},
  doi = {10.1021/acsaem.6c01097}
}
Start for free →