Cold Co-Sintering Studies of Composite Cathode for All Solid-State Li Batteries
Journal of The Electrochemical Society · 01.01.2025 · 172 (1) · 013503
DOI: 10.1149/1945-7111/ada82b ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 20.01.2025. Verfasst von Khushnuda Nur und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Engineering and Technology, Lahore, Deutsche Forschungsgemeinschaft, Bundesministerium für Bildung und Forschung.
Abstract (Originalsprache)
In the present work, we applied cold sintering for the processing of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) and then LiMn 2 O 4 /LATP/Carbon black composite cathode. Their high-temperature processing is challenging due to Li evaporation and undesirable diffusion between electrode and electrolyte, leading to high interfacial resistance between these components. Cold sintering can be an option to address these problems. For cold sintered LATP, X-ray diffraction analysis displayed only a minor amount of secondary phases, X-ray photoelectron spectroscopy showed slight reduction of Ti +4 to Ti +3 and Arrhenius plot presented higher activation energy for Li + conduction. Transferring this knowledge to our composite cathode, we got ∼85% relative density at merely 400 °C, 400 MPa using 1 molar aqueous solution of LiOH in a 1 min dwell time. To the best of our knowledge this is the first time a cold co-sintered composite cathode of this type has been prepared. It was wetted with polymer electrolyte and characterized electrochemically against a Li-metal anode. While the cell could be reversible cycled several times, proving the concept, impurity phases after cold sintering limited the extractable capacity. This detailed investigation contributes a deep insight of cold co-sintering application for composite cathodes.
Förderung
- University of Engineering and Technology, Lahore
- Deutsche Forschungsgemeinschaft
- Bundesministerium für Bildung und Forschung
Zitieren
APA
Nur, K., Roitzheim, C., Lobe, S., Ma, Q., Finsterbusch, M., Bram, M., & Guillon, O. (2025). Cold Co-Sintering Studies of Composite Cathode for All Solid-State Li Batteries. Journal of The Electrochemical Society, 172(1), 013503. https://doi.org/10.1149/1945-7111/ada82b
Vancouver
Nur K, Roitzheim C, Lobe S, Ma Q, Finsterbusch M, Bram M, et al. Cold Co-Sintering Studies of Composite Cathode for All Solid-State Li Batteries. Journal of The Electrochemical Society. 2025;172(1):013503. doi:10.1149/1945-7111/ada82b
BibTeX
@article{Nur2025,
author = {Nur, Khushnuda and Roitzheim, Christoph and Lobe, Sandra and Ma, Qianli and Finsterbusch, Martin and Bram, Martin and Guillon, Olivier},
title = {Cold Co-Sintering Studies of Composite Cathode for All Solid-State Li Batteries},
journal = {Journal of The Electrochemical Society},
year = {2025},
volume = {172},
number = {1},
pages = {013503},
doi = {10.1149/1945-7111/ada82b}
}
EUVIMED