EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode

Steffen Weinmann, Julia Schäfer, Marina Reis, Nabi Isaev, Jennifer L.M. Rupp, Kun Joong Kim

ACS Applied Energy Materials · 10.08.2026 · 9 (15) · 9790-9798

DOI: 10.1021/acsaem.6c01097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 24.07.2026. Verfasst von Steffen Weinmann und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Forschung, Technologie und Raumfahrt.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precise control of densification behavior and co-sintering compatibility is essential for the scalable fabrication and integration of oxide-based solid-state batteries. Here, the influence of sintering additives on the densification kinetics, phase evolution, microstructure, and ionic conductivity of Li7La3Zr2O12 (LLZO) electrolytes is systematically investigated, while their effect on densification and shrinkage behavior with LiCoO2-LLZO composite cathodes is evaluated to assess co-sintering compatibility. Among the investigated additives in LLZO, MgO and Li2O enable relative densities exceeding 96% while preserving high ionic conductivity and suppressing electronic conductivity. Microstructural and dilatometric analyses reveal distinct additive-dependent sintering behaviors, demonstrating the critical role of additive chemistry in governing densification and microstructural evolution. Importantly, LiOH- and Li2O-MgO-modified systems reduce the shrinkage mismatch between composite cathode and electrolyte layers from ∼14% to ∼2.5–3.5% at 1050 °C, significantly improving shrinkage compatibility. These findings demonstrate that tailored sintering additive strategies enable shrinkage compatibility while preserving electrolyte performance, representing a key step toward realizing mechanically robust oxide-based solid-state batteries.

Förderung

  • Bundesministerium für Forschung, Technologie und Raumfahrt

Zitieren

APA

Weinmann, S., Schäfer, J., Reis, M., Isaev, N., Rupp, J. L., & Kim, K. J. (2026). Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode. ACS Applied Energy Materials, 9(15), 9790-9798. https://doi.org/10.1021/acsaem.6c01097

Vancouver

Weinmann S, Schäfer J, Reis M, Isaev N, Rupp JL, Kim KJ. Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode. ACS Applied Energy Materials. 2026;9(15):9790-9798. doi:10.1021/acsaem.6c01097

BibTeX
@article{Weinmann2026,
  author = {Weinmann, Steffen and Schäfer, Julia and Reis, Marina and Isaev, Nabi and Rupp, Jennifer L.M. and Kim, Kun Joong},
  title = {Solid-State Battery Interface Engineering through Sintering Additives for Li-Garnet Electrolyte and Composite Cathode},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  volume = {9},
  number = {15},
  pages = {9790--9798},
  doi = {10.1021/acsaem.6c01097}
}
Kostenlos starten →