EUVIMEDEUVIMED entdecken
Crossref

Empowering Polyamide/Glass Fiber Composite Upcycling with Energy Sobriety Formulations via Reactive Extrusion

Kifah Nasr, Karim Delage, Fernande da Cruz-Boisson, Marion Colella, Philippe Cassagnau, Véronique Bounor-Legaré

Industrial & Engineering Chemistry Research · 29.07.2026 · 65 (29) · 15493-15505

DOI: 10.1021/acs.iecr.6c00623 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 17.07.2026. Verfasst von Kifah Nasr und 5 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: Dutch Polymer Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, performing materials from chemical and mechanical recycling of PA/glass fiber (GF) composites using the reactive extrusion process were developed. Through the reduction of the viscosity of the PA by chemical modification using amino-terminated polyethers Jeffamine T403 and dimethyl terephthalate (DMT), the breakage of glass fibers was reduced. The decrease in melt viscosity, due to chain scission of polyamide-6 (PA6) or the formation of new branched structures within the polymer matrix, led to a significant improvement in processability. Although T403, when added alone, exerted a slight negative effect on mechanical properties, especially in terms of impact strength, the concomitant addition of DMT led to an improvement. This improvement in mechanical properties was attributed to the presence of longer GFs resulting from the lower viscosity of the medium and reduced shear damage, in addition to the formation of new structures that improve the mechanical properties of such composites. Furthermore, the study investigated the influence of two extrusion cycles on the composites’ mechanical properties and found that although it is ultimately decreased, the ultimate strength of T403 and DMT-based composites remained superior to that of PA6/GF alone. This suggests that the addition of Jeffamine T403 and DMT not only improves the initial properties of the composites but also enhances their recyclability. This study showed that through reactive extrusion and small quantities of modifying agents, the recycling process not only becomes less energy-consuming but also reduces the breakage of GFs and creates in situ branched structures that enhance the mechanical properties of PA with or without the presence of GFs.

Förderung

  • Dutch Polymer Institute

Zitieren

APA

Nasr, K., Delage, K., Cruz-Boisson, F. D., Colella, M., Cassagnau, P., & Bounor-Legaré, V. (2026). Empowering Polyamide/Glass Fiber Composite Upcycling with Energy Sobriety Formulations via Reactive Extrusion. Industrial & Engineering Chemistry Research, 65(29), 15493-15505. https://doi.org/10.1021/acs.iecr.6c00623

Vancouver

Nasr K, Delage K, Cruz-Boisson FD, Colella M, Cassagnau P, Bounor-Legaré V. Empowering Polyamide/Glass Fiber Composite Upcycling with Energy Sobriety Formulations via Reactive Extrusion. Industrial & Engineering Chemistry Research. 2026;65(29):15493-15505. doi:10.1021/acs.iecr.6c00623

BibTeX
@article{Nasr2026,
  author = {Nasr, Kifah and Delage, Karim and Cruz-Boisson, Fernande da and Colella, Marion and Cassagnau, Philippe and Bounor-Legaré, Véronique},
  title = {Empowering Polyamide/Glass Fiber Composite Upcycling with Energy Sobriety Formulations via Reactive Extrusion},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2026},
  volume = {65},
  number = {29},
  pages = {15493--15505},
  doi = {10.1021/acs.iecr.6c00623}
}
Kostenlos starten →