EUVIMEDSkopri EUVIMED
Crossref

Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications

Yuxin Liu iD, Jinfeng Zhang iD, António Benjamim Mapossa, Uttandaraman Sundararaj iD

Environmental Science & Technology · 2026-04-28 · 60 (16) · 12610-12622

DOI: 10.1021/acs.est.5c17954 ↗

At a glance

Journal article in Environmental Science & Technology, published online on 2026-04-14. Written by Yuxin Liu and 3 co-authors. Institution: Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada. Major MEDLINE topics: Electronic Waste. Cited 3 times so far (Crossref); 51 references. Funded by: Alberta Innovates, Natural Sciences and Engineering Research Council of Canada (NSERC).

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This study presents a sustainable approach to resole-type phenolic resins using recycled pyrolysis oil derived from the nonmetallic fraction (NMF) of waste printed circuit boards (WPCBs). GC-MS confirmed phenol and phenolic derivatives in the recycled pyrolysis oil, providing suitable monomers. Among the tested conditions (300, 400, 500 °C), pyrolysis at 400 °C maximized both recycled pyrolysis oil yield and phenolic content. Resins were synthesized using recycled pyrolysis oil, pure phenol, and formaldehyde across recycled pyrolysis oil-to-phenol ratios from 100R-0P to 0R-100P, and their synthesis behavior, mechanical performance, thermal stability, and flame retardancy were comprehensively characterized. A novel mechanism is proposed, in which, under basic conditions, phenolic species form methylol phenols that condense via ether and methylene linkage, as confirmed by FTIR analysis, while nonphenolic and sterically hindered compounds limit apparent network rigidity. Flame retardancy was evaluated by the limiting oxygen index (LOI), which reached 42.3% for 0R-100P and 27.0% for 100R-0P. Formulations containing up to 40 wt % recycled pyrolysis oil retained over 82% of the tensile properties and 87% of impact resistance compared to the virgin resin. These findings highlight the feasibility of converting e-waste into value-added, high-performance, and flame-retardant thermosets, offering a viable route toward circular material innovation.

Subjects

MeSH terms (MEDLINE)

Electronic WastePhenolsRecyclingPyrolysisFlame RetardantsGas Chromatography-Mass Spectrometry

Author keywords

electronic-wasteflame retardantnonmetallic fractionpyrolysisrecyclingresole-type phenolic resinvalorization

Substances

PhenolsFlame Retardants

Authors and institutions

  • Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada.

ORCID profiles: Yuxin Liu, Jinfeng Zhang, Uttandaraman Sundararaj

Funding

  • Alberta Innovates
  • Natural Sciences and Engineering Research Council of Canada (NSERC)

Cite

APA

Liu, Y., Zhang, J., Mapossa, A. B., & Sundararaj, U. (2026). Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications. Environmental Science & Technology, 60(16), 12610-12622. https://doi.org/10.1021/acs.est.5c17954

Vancouver

Liu Y, Zhang J, Mapossa AB, Sundararaj U. Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications. Environmental Science & Technology. 2026;60(16):12610-12622. doi:10.1021/acs.est.5c17954

BibTeX
@article{Liu2026,
  author = {Liu, Yuxin and Zhang, Jinfeng and Mapossa, António Benjamim and Sundararaj, Uttandaraman},
  title = {Converting Low-Value E-Waste into Phenolic Resole Resins: A Route to Value-Added, High-Performance Advanced Materials for Multifunctional Applications},
  journal = {Environmental Science & Technology},
  year = {2026},
  volume = {60},
  number = {16},
  pages = {12610--12622},
  doi = {10.1021/acs.est.5c17954}
}
Start for free →